Husqvarna RZ3019BF, 966582101 manual Belts, Deck Belt, To replace deck belt

Page 37

MAINTENANCE

Parking Brake

Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufficient braking action.

To adjust the parking brake, contact the Husqvarna service workshop.

WARNING!

Faulty adjustment can result in reduced braking ability and can cause an accident.

V-belts

Check every 100 hours of operation. Check for severe cracking and large nicks.

NOTE: The belt will show some small cracks in normal operation.

The belts are not adjustable. Replace belts if they begin to slip from wear.

Deck Belt

To replace deck belt

Deck belt removal.

1.Park on a level surface. Apply park brake.

2.Lower the deck to the lowest cutting position.

3.Disengage the clutch by sliding the blade control lever downwards.

4.Carefully lift the belt away from belt keepers and off deck pulleys and remove from deck.

5.Replace belt (refer to the belt routing decal on the deck) and re-engage clutch.

8050-005

Check for proper operation of parking brake

8058-074

Disengage clutch to replace deck belt

8050-013

Check deck belt for excessive wear

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and decalsManual Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Parking Brake Ignition SwitchThrottle Control Fuel Tank Choke ControlMower Deck Lifting Lever Fuel Shut Off ValveTracking Always use the high position F to transportBypass Linkage Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceBefore After Year To clean battery and terminals BatteryAlways use protective glasses when handling the battery Tire Pressures Safety SystemDeck Belt BeltsTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckRemoval and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LubricationFront Wheel Bearings Front Wheel MountEngine Lubrication Steering Control ShaftsProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceSchematic Torque Specifications Technical DataStandard Hardware Engine RZ3019 BFTransmission Equipment Overall dimensionsProductivity USA Requirements CONForMITY CertificatesDelivery Service Service JournalHour Service Perform the 25-hour service At Least Once Each Year Page 115 355026R2 09/14/10

RZ3019BF, 966582101 specifications

The Husqvarna 966582101, RZ3019BF, is a high-performance zero-turn mower designed for both residential and commercial use. Renowned for its robust construction and user-friendly features, it delivers exceptional efficiency and maneuverability, making lawn maintenance a breeze.

One of the standout features of the RZ3019BF is its powerful 19 HP Kawasaki engine, which offers reliable performance and enough power to tackle tough mowing jobs. This engine not only provides efficient cutting power but also enhances fuel efficiency, allowing users to operate the mower for extended periods without frequent refueling. The combination of the engine's output and the mower's compact design enables it to navigate tight spaces with ease.

Another highlight of the Husqvarna RZ3019BF is its cutting deck. Equipped with a 42-inch fabricated cutting deck, this mower delivers a clean and even cut across various types of grass. The 3-blade system ensures that grass is cut finely and effectively, contributing to a healthier lawn. With adjustable cutting heights between 1.5 and 4 inches, users can customize their mowing experience based on lawn conditions and personal preferences.

The zero-turn capability of the RZ3019BF allows it to pivot and maneuver around obstacles without missing a spot. This feature makes it ideal for complex lawns and gardens, helping to maximize efficiency and save time. The ergonomic controls enhance user comfort, making it easy to operate for extended periods.

Technologically, the RZ3019BF is equipped with a premium gauge steel frame that adds to its durability while keeping maintenance manageable. The mower's easy-access maintenance points simplify servicing, ensuring the machine remains in top condition with minimal effort.

Users also appreciate the large rear tires that provide excellent traction and stability, ensuring smooth operation on various terrains. Furthermore, the mower's compact design allows for easy storage, making it a practical choice for homeowners with limited space.

In summary, the Husqvarna 966582101, RZ3019BF, combines power, efficiency, and maneuverability, making it an excellent choice for anyone looking to maintain their lawn effortlessly. With its strong engine, effective cutting deck, and user-friendly features, this mower stands out in its category, promising performance and longevity for years to come.
Top Page Image Contents