Husqvarna 532 42 84-01, 96045000414 Cleaning, Muffler, Spark Plugs, IN-LINE Fuel Filter See Fig

Page 17

MAINTENANCE

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or dam- age.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

IN-LINE FUEL FILTER (See Fig. 18)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•With engine cool, remove filter and plug fuel line sec- tions.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

CLAMP

FUEL FILTER

FIG. 18

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

DECK WASHOUT PORT (See Fig. 19)

Your tractor’s deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use.

1.Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.

IMPORTANT: Make certain the tractor’s discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached.

2.Make sure the PTO (Blade Engage) is not engaged, set the parking brake, and stop the engine.

3.Thread the nozzle adapter (packaged with your tractor’s Operator’s Manual) onto the end of your garden hose.

4.Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle.

17

HOSE

NOZZLE ADAPTER

WASHOUT

PORT

Fig. 19

IMPORTANT: Tug hose ensuring connection is secure.

5.Turn the water on.

6.While sitting in the operator’s position on the tractor, re-start the engine and place the throttle lever in the Fast " " position.

IMPORTANT: Recheck the area making certain the area is clear.

7.Move the tractor’s PTO (Blade Engage) to the ON position. Remain in the operator’s position with the cutting deck engaged until the deck is cleaned.

8.Move the tractor’s PTO (Blade Engage) to the OFF position. Turn the ignition key to the STOP position to turn the tractor’s engine off. Turn the water off.

9.Pull back the lock collar of the nozzle adapter to dis- connect the adapter from the nozzle washout port.

10.Move the tractor to a dry area, preferably a concrete or paved area. Engage the mower deck PTO to remove ex- cess water and to help dry before putting the tractor away.

WARNING: A broken or missing washout fitting could expose you or others to thrownobjectsfromcontactwiththeblade.

•Replace broken or missing washout fitting immediately, prior to using mower again.

•Pluganyholesinmowerwithboltsandlocknuts.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents YTH20K46 Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Unassembled Parts AssemblyTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Attachment Clutch Switch Disengaged Engaged HOW to USE Your TractorTo SET Parking Brake See Fig Stopping See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo Move Forward and Backward See Fig To USE Cruise Control J See FigUsing the Reverse Operation System Service REMINDER/HOUR MeterReverse Operation System ROS See Fig To Operate on HillsCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigPurge Transmission Mowing TipsLubrication Chart MaintenanceTractor BatteryBlade Care Blade Removal See FigEngine Muffler CleaningSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower Visual SIDE-TO-SIDE Adjustment See FigTo Replace Mower Blade Drive Belt See Fig Belt InstallationTo Check Brake To Replace Motion Drive Belt See FigReplacing Battery See Fig To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission Other StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Tractor - Model Number YTH20K46 96045000414, Product no 45 SchematicElectrical KEY Part Description Chassis Tractor - Model Number YTH20K46 96045000414, Product no 45 Drive Washer Harden .793 x 1.637 x Engine Spark Arrester KITEngine Kohler Model No. SV600 Steering Assembly Tractor - Model Number YTH20K46 96045000414, Product no 45 Wheels and Tires Decals532 42 Seat Seat AssemblyMower Deck KEY Part NO. no Description 8787 100 101 Mower LiftOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation532 42 84-01 Rev 1 05.11.09 TH

532 42 84-01, 96045000414 specifications

The Husqvarna 96045000414,532 42 84-01 is a robust riding lawn mower that exemplifies efficiency and performance in lawn care. This machine is designed for homeowners who desire a seamless mowing experience combined with ease of use and advanced technology.

One of the standout features of the Husqvarna 96045000414 is its powerful engine. It is equipped with a reliable and durable engine that ensures longevity and efficiency. This engine delivers the necessary power to tackle dense grass and tough terrains, making it suitable for various lawn sizes and conditions.

The mower's cutting deck spans 42 inches, making it ideal for residential lawns. The width ensures that it can cover a significant ground area quickly, reducing mowing time. The cutting height can be easily adjusted to suit different grass types, and the precision cutting blades guarantee a clean and even cut every time.

This model also incorporates advanced technologies that enhance the user experience. The automatic transmission allows for smooth gear shifting, making it easier to navigate different terrains without the hassle of manual adjustments. The tight turning radius provides excellent maneuverability around obstacles such as trees and flower beds.

In terms of comfort, the Husqvarna 96045000414 boasts a comfortable seat designed for extended use, reducing fatigue during longer mowing sessions. The ergonomic steering wheel and controls are intuitively placed, allowing for easy access and operation while providing optimal control over the machine.

Another attractive feature is the easy access to maintenance points, which simplifies the upkeep of the mower. Regular maintenance is crucial to maintaining performance, and Husqvarna engineers this model with user-friendly accessibility in mind.

Safety features are also a priority with the Husqvarna 96045000414. The mower comes with a safety ignition switch and an emergency brake system, ensuring that operators are safe while using the machine.

In conclusion, the Husqvarna 96045000414,532 42 84-01 riding lawn mower represents a perfect blend of power, efficiency, and comfort. With its advanced cutting technology, user-friendly features, and robust construction, it is an excellent choice for homeowners looking to maintain their lawns with ease and precision. Whether you have a small or medium-sized lawn, this model promises reliability and performance, making lawn care less of a chore and more of an enjoyable task.
Top Page Image Contents