Husqvarna 96045000411 To Move Forward and Backward See Fig, To USE Cruise Control J See Fig

Page 10

OPERATION

TO MOVE FORWARD AND BACKWARD (See Fig. 7)

The direction and speed of movement is controlled by the forward and reverse drive pedals.

•Start tractor and release parking brake.

•Slowly depress forward (K) or reverse (L) drive pedal to begin movement. Ground speed increases the further down the pedal is depressed.

TO USE CRUISE CONTROL (J) (See Fig. 7)

The cruise control feature can be used for forward travel only.

J

K

L

FIG. 7

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

A

FIG. 8

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjustmowertodesiredcuttingheight(See“TOADJUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

FIG. 9

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents YTH20K46 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents To Remove Tractor from Carton AssemblyUnassembled Parts Unpack CartonCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor To SET Parking Brake See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged Stopping See FigSystem Characteristics To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Move Forward and Backward See FigTo Operate on Hills To Operate Mower See FigReverse Operation System ROS See Fig To Transport See FigsCheck Engine OIL Level Service REMINDER/HOUR MeterBefore Starting the Engine ADD GasolineMowing Tips Purge TransmissionMaintenance Lubrication ChartBlade Care BatteryTractor Blade Removal See FigEngine Spark Plugs CleaningMuffler IN-LINE Fuel Filter See FigTo Install Mower See Figs Service and AdjustmentsTo Remove Mower See Fig Install belt on engine pulley M Precision SIDE-TO-SIDE Adjustment See Fig Visual SIDE-TO-SIDE Adjustment See FigTo Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig To Remove Wheel for Repairs See FigTransmission Fuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor - Model Number YTH20K46 96045000411, Product no 45Electrical KEY Part Description Chassis 532 19 532 41196 532 41 45-80 Console Asm. Deck Lift Drive AABC-1X2B-1GX1 872 11Spark Arrester KIT EngineEngine Kohler Model No. SV600 Steering Assembly Prem Husq SR/HR 873 90 Steering Assembly532 18 532 05Wheels and Tires Decals532 42 Seat Assembly 532 40 Seat116 Mower Deck152 117 119KEY Part NO. no Description Mower Lift 819 17Limited Warranty Husqvarna S Obligations Under the Warranty 532 42 47-55 10.23.08 BAD

96045000411 specifications

The Husqvarna 96045000411 is a versatile and powerful garden tractor designed to provide optimal performance and comfort for homeowners and landscaping professionals alike. With its robust construction and advanced features, this tractor stands out as a reliable tool for various lawn care tasks.

One of the most notable characteristics of the Husqvarna 96045000411 is its powerful engine. Equipped with a reliable and efficient gasoline engine, this model delivers remarkable torque and horsepower, enabling it to handle even the toughest mowing conditions. The engine's design promotes easy starting and smooth operation, ensuring that users can tackle their yard work with minimal hassle.

The cutting deck of the Husqvarna 96045000411 is another standout feature. With a wide cutting width, it allows for efficient mowing of large areas, significantly reducing the time spent on lawn maintenance. The deck is constructed with durable materials to withstand the rigors of frequent use, while its adjustable cutting heights give users the flexibility to achieve their desired grass length. The construction also promotes excellent grass discharge, whether mulching, bagging, or side discharging.

In terms of technology, the Husqvarna 96045000411 is equipped with an intuitive interface that eases operation. The user-friendly dashboard displays essential information such as fuel levels and speed, keeping users informed throughout the mowing process. Additionally, this model often features ergonomic controls, allowing for comfortable operation over extended periods.

Safety is also a key focus in the design of the Husqvarna 96045000411. With safety mechanisms such as the automatic blade braking system, users can feel secure while operating the tractor. The sturdy frame and low center of gravity contribute to stability and maneuverability on varied terrains.

Comfort features are abundant in the Husqvarna 96045000411, including an adjustable slide seat that accommodates different user heights. The smooth ride provided by the integrated suspension system minimizes vibrations and helps reduce fatigue, making it more enjoyable to use for longer periods.

In conclusion, the Husqvarna 96045000411 is an exceptional garden tractor that combines power, efficiency, and comfort for an optimized lawn care experience. Its robust engine, wide cutting deck, user-friendly technology, and safety features make it an ideal choice for anyone looking to maintain their outdoor spaces effectively and effortlessly. Whether you have a small yard or a larger estate, this garden tractor is designed to meet a variety of mowing needs with reliability and ease.
Top Page Image Contents