Husqvarna 96045000411 To Replace Mower Blade Drive Belt See Fig, To Check Brake, Belt Removal

Page 21

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 30)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Work belt around both mandrel pulleys and idler pulleys.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower (See "To Install Mower" in this section of manual).

IDLER

PULLEYS

MANDREL

PULLEY

MANDREL

PULLEY

FIG. 30

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

•Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

•Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION DRIVE BELT (See Fig. 31)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1.Remove mower (See “TO REMOVE MOWER” section in this manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Remove belt from stationary idler (A) and clutching idler (B).

3.Remove belt from centerspan idler (C).

4.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle input pulley (D).

5.Remove belt downward from engine pulley (E).

6.Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

1.Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

2.Pull belt toward front of tractor and roll belt onto engine pulley (E).

3.Pull belt toward rear of tractor. Carefully work belt down around transaxle input pulley (D). Be sure belt is inside the belt keeper.

4.Install belt on centerspan idler (C).

5.Install belt through stationary idler (A) and clutching idler (B).

6.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

7.Install mower (See “TO INSTALL MOWER” section in

this manual).

 

E

 

F

A

 

B

G

 

C

 

D

02952

FIG. 31

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents YTH20K46 Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Unassembled Parts AssemblyTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Attachment Clutch Switch Disengaged Engaged HOW to USE Your TractorTo SET Parking Brake See Fig Stopping See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigSystem Characteristics To Move Forward and Backward See FigReverse Operation System ROS See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Service REMINDER/HOUR MeterCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsLubrication Chart MaintenanceTractor BatteryBlade Care Blade Removal See FigEngine Muffler CleaningSpark Plugs IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigsTo Remove Mower See Fig Install belt on engine pulley M Visual SIDE-TO-SIDE Adjustment See Fig Precision SIDE-TO-SIDE Adjustment See FigTo Level Mower To Replace Mower Blade Drive Belt See Fig Belt InstallationTo Check Brake To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery See Fig To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission Other StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Tractor - Model Number YTH20K46 96045000411, Product no 45 SchematicElectrical KEY Part Description Chassis 532 41 532 19196 532 41 45-80 Console Asm. Deck Lift Drive 872 11 AABC-1X2B-1GX1Engine Spark Arrester KITEngine Kohler Model No. SV600 Steering Assembly Prem Husq SR/HR 532 18 Steering Assembly873 90 532 05Decals Wheels and Tires532 42 532 40 Seat Seat Assembly152 Mower Deck116 117 119KEY Part NO. no Description 819 17 Mower LiftLimited Warranty Husqvarna S Obligations Under the Warranty 532 42 47-55 10.23.08 BAD

96045000411 specifications

The Husqvarna 96045000411 is a versatile and powerful garden tractor designed to provide optimal performance and comfort for homeowners and landscaping professionals alike. With its robust construction and advanced features, this tractor stands out as a reliable tool for various lawn care tasks.

One of the most notable characteristics of the Husqvarna 96045000411 is its powerful engine. Equipped with a reliable and efficient gasoline engine, this model delivers remarkable torque and horsepower, enabling it to handle even the toughest mowing conditions. The engine's design promotes easy starting and smooth operation, ensuring that users can tackle their yard work with minimal hassle.

The cutting deck of the Husqvarna 96045000411 is another standout feature. With a wide cutting width, it allows for efficient mowing of large areas, significantly reducing the time spent on lawn maintenance. The deck is constructed with durable materials to withstand the rigors of frequent use, while its adjustable cutting heights give users the flexibility to achieve their desired grass length. The construction also promotes excellent grass discharge, whether mulching, bagging, or side discharging.

In terms of technology, the Husqvarna 96045000411 is equipped with an intuitive interface that eases operation. The user-friendly dashboard displays essential information such as fuel levels and speed, keeping users informed throughout the mowing process. Additionally, this model often features ergonomic controls, allowing for comfortable operation over extended periods.

Safety is also a key focus in the design of the Husqvarna 96045000411. With safety mechanisms such as the automatic blade braking system, users can feel secure while operating the tractor. The sturdy frame and low center of gravity contribute to stability and maneuverability on varied terrains.

Comfort features are abundant in the Husqvarna 96045000411, including an adjustable slide seat that accommodates different user heights. The smooth ride provided by the integrated suspension system minimizes vibrations and helps reduce fatigue, making it more enjoyable to use for longer periods.

In conclusion, the Husqvarna 96045000411 is an exceptional garden tractor that combines power, efficiency, and comfort for an optimized lawn care experience. Its robust engine, wide cutting deck, user-friendly technology, and safety features make it an ideal choice for anyone looking to maintain their outdoor spaces effectively and effortlessly. Whether you have a small yard or a larger estate, this garden tractor is designed to meet a variety of mowing needs with reliability and ease.
Top Page Image Contents