Husqvarna 96045000411 owner manual To Adjust Steering Wheel Alignment, Front Wheel TOE-IN/CAMBER

Page 22

SERVICE AND ADJUSTMENTS

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 32)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 32

TO START ENGINE WITH A WEAK BATTERY (See Fig. 33)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WEAK OR DEAD

 

 

FULLY CHARGED

BATTERY

 

 

BATTERY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FIG. 33

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents YTH20K46 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents To Remove Tractor from Carton AssemblyUnassembled Parts Unpack CartonCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor To SET Parking Brake See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged Stopping See FigSystem Characteristics To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Move Forward and Backward See FigTo Operate on Hills To Operate Mower See FigReverse Operation System ROS See Fig To Transport See FigsCheck Engine OIL Level Service REMINDER/HOUR MeterBefore Starting the Engine ADD GasolineMowing Tips Purge TransmissionMaintenance Lubrication ChartBlade Care BatteryTractor Blade Removal See FigEngine Spark Plugs CleaningMuffler IN-LINE Fuel Filter See FigTo Install Mower See Figs Service and AdjustmentsTo Remove Mower See Fig Install belt on engine pulley M Precision SIDE-TO-SIDE Adjustment See Fig Visual SIDE-TO-SIDE Adjustment See FigTo Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig To Remove Wheel for Repairs See FigTransmission Fuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor - Model Number YTH20K46 96045000411, Product no 45Electrical KEY Part Description Chassis 532 19 532 41196 532 41 45-80 Console Asm. Deck Lift Drive AABC-1X2B-1GX1 872 11Spark Arrester KIT EngineEngine Kohler Model No. SV600 Steering Assembly Prem Husq SR/HR 873 90 Steering Assembly532 18 532 05Wheels and Tires Decals532 42 Seat Assembly 532 40 Seat116 Mower Deck152 117 119KEY Part NO. no Description Mower Lift 819 17Limited Warranty Husqvarna S Obligations Under the Warranty 532 42 47-55 10.23.08 BAD

96045000411 specifications

The Husqvarna 96045000411 is a versatile and powerful garden tractor designed to provide optimal performance and comfort for homeowners and landscaping professionals alike. With its robust construction and advanced features, this tractor stands out as a reliable tool for various lawn care tasks.

One of the most notable characteristics of the Husqvarna 96045000411 is its powerful engine. Equipped with a reliable and efficient gasoline engine, this model delivers remarkable torque and horsepower, enabling it to handle even the toughest mowing conditions. The engine's design promotes easy starting and smooth operation, ensuring that users can tackle their yard work with minimal hassle.

The cutting deck of the Husqvarna 96045000411 is another standout feature. With a wide cutting width, it allows for efficient mowing of large areas, significantly reducing the time spent on lawn maintenance. The deck is constructed with durable materials to withstand the rigors of frequent use, while its adjustable cutting heights give users the flexibility to achieve their desired grass length. The construction also promotes excellent grass discharge, whether mulching, bagging, or side discharging.

In terms of technology, the Husqvarna 96045000411 is equipped with an intuitive interface that eases operation. The user-friendly dashboard displays essential information such as fuel levels and speed, keeping users informed throughout the mowing process. Additionally, this model often features ergonomic controls, allowing for comfortable operation over extended periods.

Safety is also a key focus in the design of the Husqvarna 96045000411. With safety mechanisms such as the automatic blade braking system, users can feel secure while operating the tractor. The sturdy frame and low center of gravity contribute to stability and maneuverability on varied terrains.

Comfort features are abundant in the Husqvarna 96045000411, including an adjustable slide seat that accommodates different user heights. The smooth ride provided by the integrated suspension system minimizes vibrations and helps reduce fatigue, making it more enjoyable to use for longer periods.

In conclusion, the Husqvarna 96045000411 is an exceptional garden tractor that combines power, efficiency, and comfort for an optimized lawn care experience. Its robust engine, wide cutting deck, user-friendly technology, and safety features make it an ideal choice for anyone looking to maintain their outdoor spaces effectively and effortlessly. Whether you have a small yard or a larger estate, this garden tractor is designed to meet a variety of mowing needs with reliability and ease.
Top Page Image Contents