Husqvarna 96045000411 owner manual To Operate Mower See Fig, Reverse Operation System ROS See Fig

Page 11

OPERATION

TO OPERATE MOWER (See Fig. 10)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION:Donotoperatethemowerwithout

eithertheentiregrasscatcher,onmowersso equipped,orthedeflectorshield(S)inplace.

S

FIG. 10

REVERSE OPERATION SYSTEM (ROS) (See Fig. 11)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless

absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

•Depress brake pedal all the way down.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

 

8

 

0282

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

FIG. 11

•Look down and behind before and while backing.

•Slowly depress reverse drive pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowlydepressappropriatedrivepedaltoslowestsetting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 3 and 12)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TRANSMISSION ENGAGED

TRANSMISSION DISENGAGED

FIG. 12

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents YTH20K46 II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor Stopping See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged To SET Parking Brake See FigTo Move Forward and Backward See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig System CharacteristicsTo Transport See Figs To Operate Mower See FigReverse Operation System ROS See Fig To Operate on HillsADD Gasoline Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelPurge Transmission Mowing TipsLubrication Chart MaintenanceBlade Removal See Fig BatteryTractor Blade CareEngine IN-LINE Fuel Filter See Fig CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Install belt on engine pulley M To Level Mower Visual SIDE-TO-SIDE Adjustment See FigPrecision SIDE-TO-SIDE Adjustment See Fig To Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeTo Remove Wheel for Repairs See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Engine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine dies when Tractor - Model Number YTH20K46 96045000411, Product no 45 SchematicElectrical KEY Part Description Chassis 196 532 41 45-80 Console Asm. Deck Lift 532 41532 19 Drive 872 11 AABC-1X2B-1GX1Engine Spark Arrester KITEngine Kohler Model No. SV600 Steering Assembly Prem Husq SR/HR 532 05 Steering Assembly532 18 873 90532 42 DecalsWheels and Tires 532 40 Seat Seat Assembly117 119 Mower Deck152 116KEY Part NO. no Description 819 17 Mower LiftLimited Warranty Husqvarna S Obligations Under the Warranty 532 42 47-55 10.23.08 BAD

96045000411 specifications

The Husqvarna 96045000411 is a versatile and powerful garden tractor designed to provide optimal performance and comfort for homeowners and landscaping professionals alike. With its robust construction and advanced features, this tractor stands out as a reliable tool for various lawn care tasks.

One of the most notable characteristics of the Husqvarna 96045000411 is its powerful engine. Equipped with a reliable and efficient gasoline engine, this model delivers remarkable torque and horsepower, enabling it to handle even the toughest mowing conditions. The engine's design promotes easy starting and smooth operation, ensuring that users can tackle their yard work with minimal hassle.

The cutting deck of the Husqvarna 96045000411 is another standout feature. With a wide cutting width, it allows for efficient mowing of large areas, significantly reducing the time spent on lawn maintenance. The deck is constructed with durable materials to withstand the rigors of frequent use, while its adjustable cutting heights give users the flexibility to achieve their desired grass length. The construction also promotes excellent grass discharge, whether mulching, bagging, or side discharging.

In terms of technology, the Husqvarna 96045000411 is equipped with an intuitive interface that eases operation. The user-friendly dashboard displays essential information such as fuel levels and speed, keeping users informed throughout the mowing process. Additionally, this model often features ergonomic controls, allowing for comfortable operation over extended periods.

Safety is also a key focus in the design of the Husqvarna 96045000411. With safety mechanisms such as the automatic blade braking system, users can feel secure while operating the tractor. The sturdy frame and low center of gravity contribute to stability and maneuverability on varied terrains.

Comfort features are abundant in the Husqvarna 96045000411, including an adjustable slide seat that accommodates different user heights. The smooth ride provided by the integrated suspension system minimizes vibrations and helps reduce fatigue, making it more enjoyable to use for longer periods.

In conclusion, the Husqvarna 96045000411 is an exceptional garden tractor that combines power, efficiency, and comfort for an optimized lawn care experience. Its robust engine, wide cutting deck, user-friendly technology, and safety features make it an ideal choice for anyone looking to maintain their outdoor spaces effectively and effortlessly. Whether you have a small yard or a larger estate, this garden tractor is designed to meet a variety of mowing needs with reliability and ease.
Top Page Image Contents