Husqvarna 96045000411 owner manual To Level Mower, Visual SIDE-TO-SIDE Adjustment See Fig

Page 20

SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 26)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

FIG. 26

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 27)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

FIG.27

•If adjustment is necessary, see step in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 28 & 29) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

02548

BB

FIG. 28

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

TIGHTEN ADJUST

LOOSEN

ADJUST NUT

NUT B TO RAISE

B TO LOWER

MOWER

 

02950

MOWER

 

 

LOOSEN JAM NUT A FIRST

 

FIG. 29

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents YTH20K46 Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Attachment Clutch Switch Disengaged EngagedTo SET Parking Brake See Fig Stopping See FigTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Move Forward and Backward See FigTo Operate Mower See Fig Reverse Operation System ROS See FigTo Operate on Hills To Transport See FigsService REMINDER/HOUR Meter Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Purge TransmissionMaintenance Lubrication ChartBattery TractorBlade Care Blade Removal See FigEngine Cleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Install belt on engine pulley M To Level Mower Visual SIDE-TO-SIDE Adjustment See FigPrecision SIDE-TO-SIDE Adjustment See Fig Belt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor - Model Number YTH20K46 96045000411, Product no 45Electrical KEY Part Description Chassis 196 532 41 45-80 Console Asm. Deck Lift 532 41532 19 Drive AABC-1X2B-1GX1 872 11Spark Arrester KIT EngineEngine Kohler Model No. SV600 Steering Assembly Prem Husq SR/HR Steering Assembly 532 18873 90 532 05532 42 DecalsWheels and Tires Seat Assembly 532 40 SeatMower Deck 152116 117 119KEY Part NO. no Description Mower Lift 819 17Limited Warranty Husqvarna S Obligations Under the Warranty 532 42 47-55 10.23.08 BAD

96045000411 specifications

The Husqvarna 96045000411 is a versatile and powerful garden tractor designed to provide optimal performance and comfort for homeowners and landscaping professionals alike. With its robust construction and advanced features, this tractor stands out as a reliable tool for various lawn care tasks.

One of the most notable characteristics of the Husqvarna 96045000411 is its powerful engine. Equipped with a reliable and efficient gasoline engine, this model delivers remarkable torque and horsepower, enabling it to handle even the toughest mowing conditions. The engine's design promotes easy starting and smooth operation, ensuring that users can tackle their yard work with minimal hassle.

The cutting deck of the Husqvarna 96045000411 is another standout feature. With a wide cutting width, it allows for efficient mowing of large areas, significantly reducing the time spent on lawn maintenance. The deck is constructed with durable materials to withstand the rigors of frequent use, while its adjustable cutting heights give users the flexibility to achieve their desired grass length. The construction also promotes excellent grass discharge, whether mulching, bagging, or side discharging.

In terms of technology, the Husqvarna 96045000411 is equipped with an intuitive interface that eases operation. The user-friendly dashboard displays essential information such as fuel levels and speed, keeping users informed throughout the mowing process. Additionally, this model often features ergonomic controls, allowing for comfortable operation over extended periods.

Safety is also a key focus in the design of the Husqvarna 96045000411. With safety mechanisms such as the automatic blade braking system, users can feel secure while operating the tractor. The sturdy frame and low center of gravity contribute to stability and maneuverability on varied terrains.

Comfort features are abundant in the Husqvarna 96045000411, including an adjustable slide seat that accommodates different user heights. The smooth ride provided by the integrated suspension system minimizes vibrations and helps reduce fatigue, making it more enjoyable to use for longer periods.

In conclusion, the Husqvarna 96045000411 is an exceptional garden tractor that combines power, efficiency, and comfort for an optimized lawn care experience. Its robust engine, wide cutting deck, user-friendly technology, and safety features make it an ideal choice for anyone looking to maintain their outdoor spaces effectively and effortlessly. Whether you have a small yard or a larger estate, this garden tractor is designed to meet a variety of mowing needs with reliability and ease.
Top Page Image Contents