HOW to USE Your Lawn Mower

The operation of any lawn

mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear

safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over spectacles.

ENGINE SPEED

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Turn nut on underside of drive control to increase drive speed.

3.Operate mower to test drive speed. Readjust as required.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

Operator presence control bar

The engine speed was set at the factory for optimum performance. Speed is not adjustable.

ENGINE ZONE CONTROL

CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the lawn mower.

DRIVE CONTROL

•Self-propelling is controlled by hold- ing the operator presence control bar down to the handle and pulling the drive control lever rearward to the handle. The farther toward the handle the lever is pulled, the faster the unit will travel.

•Forward motion will stop when either the operator presence control bar or drive control lever are released. To stop forward motion without stopping engine, release the drive control lever only. Hold operator presence control bar down against handle to continue mowing

without self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels.

•To keep drive control engaged when turning corners, push down on the handle to lift the front wheels off the ground while turning lawn mower.

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become “loose”, resulting in decreased speed. There is a turnbuckle on the underside of the drive control housing to increase tension on the drive cable. Pro- ceed as follows:

		Drive
	TO	control
	TO	lever	DRIVE
	ENGAGE	lever
	ENGAGE
Adjustment	DRIVE	CONTROL
turnbuckle	CONTROL	DISENGAGED

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns.

•To change cutting height, squeeze ad-

juster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs.

LEVER BACKWARD	Plate tab
TO LOWER MOWER

LEVER FORWARD TO RAISE MOWER Lever

TO CONVERT MOWER

Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging:

REAR BAGGING

•Open rear door, remove mulcher plug. Store mulcher plug in a safe place.

•You can now install the grass catcher or optional clipping deﬂ ector.

•To convert to mulching or discharging operation, install mulcher plug into rear discharge opening of mower.

917.37581 specifications

The Husqvarna 917.37581 is a robust and efficient lawn tractor that combines advanced technology with user-friendly design, making it an ideal choice for homeowners looking to maintain their lawns with ease. This riding mower is designed for residential use, ensuring that lawn care is not only effective but also enjoyable.

One of the standout features of the Husqvarna 917.37581 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this lawn tractor delivers sufficient power for tackling various lawn sizes and terrains. The engine operates smoothly, ensuring consistent performance that can handle both flat and hilly landscapes without compromising the cutting quality.

Another notable characteristic is the 42-inch cutting deck. This size strikes a balance between maneuverability and efficiency, allowing users to cover a considerable area without sacrificing the precision of cuts. The cutting height is adjustable, providing flexibility to adapt to different grass types and user preferences. The deck is designed for optimal airflow, which enhances the grass clipping dispersal, leading to a cleaner and healthier lawn.

The Husqvarna 917.37581 features a hydrostatic transmission, which simplifies the operation of the mower. Users can shift speeds seamlessly without the need for manual gear changes. This technology ensures a smoother ride and enhanced control, making it easier to navigate through tight spaces and around obstacles.

Additionally, the tractor is equipped with a comfortable seat and an ergonomic steering wheel, promoting an enjoyable mowing experience. The design includes easy-to-use controls that allow users to operate various functions without distraction, further enhancing efficiency.

For added convenience, the Husqvarna 917.37581 comes with an optional bagging system and mulching capabilities. These features allow homeowners to collect grass clippings neatly or mulch them back into the lawn, returning essential nutrients to the soil.

Durability is another key aspect of the Husqvarna brand, and the 917.37581 is no exception. Constructed with high-quality materials, the mower is built to withstand the rigors of regular use, ensuring longevity and reliability.

In conclusion, the Husqvarna 917.37581 lawn tractor is an excellent choice for anyone seeking a powerful, versatile, and user-friendly machine for lawn maintenance. With its strong engine, adjustable cutting deck, hydrostatic transmission, and comfortable design, it stands out as a dependable solution for achieving a well-manicured lawn.