Husqvarna 917.37581 owner manual To Remove Drive Belt, To Replace Drive Belt, To Adjust Handle

Page 15

TO REMOVE DRIVE BELT

1.Remove drive cover and belt keeper.

2.Remove belt from gearcase pulley by pushing down on pulley and rolling belt off it.

3.Turn lawn mower on its side with air fi lter and carburetor down.

4.Remove blade and debris shield.

5.Remove belt from engine pulley on crankshaft.

TO REPLACE DRIVE BELT

1.Place new drive belt in the belt retain- ers of the debris shield.

2.Route the other end of the new drive belt through hole in housing.

3.Reinstall debris shield and blade.

4.Return mower to upright position.

5.Install new belt on gearcase pulley.

6.Reinstall belt keeper and drive cover. NOTE: Always use factory approved belt to assure proper fi t and long life.

Drive cover

TO ADJUST HANDLE

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove it from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeezelowerhandleinandpositionholes onto mounting pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

SQUEEZE

TO ADJUST

Lower handle

 

Mounting pin

Handle

 

bracket

Hairpin cotter

Belt keeper

Belt

Debris shield

PUSH

Mowing

Mowing

position

position

DOWN

 

 

Hairpin

Handle

cotter

bracket

Mounting

 

pin

HIGH POSITION

LOW POSITION

Belt retainers

Drive belt

Lower handle

ROTATE

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Rotary Lawn Mower Safety Rules Table of ContentsDo not General ServiceIII. Children IV. Safe Handling of GasolineLimited Warranty WarrantyAccessories Product SpecificationsAssembly / PRE-OPERATION HOW to SET UP Your MowerTo Remove Mower from Carton Meets Cpsc Safety Requirements OperationKnow Your Lawn Mower HOW to USE Your Lawn Mower ADD OIL Simple Steps to Remember When Converting Your Lawn MowerBefore Starting Engine To Empty Grass CatcherADD Gasoline To Stop EngineTo Start Engine Mowing TipsMulching Mowing Tips MaintenanceGeneral Recommendations Lubrication ChartTo Change Engine OIL EngineTo Sharpen Blade Gear CaseService and Adjustments CleaningLawn Mower To Adjust Handle To Remove Drive BeltTo Replace Drive Belt Fuel System StorageCarburetor HandleCylinder Problem Cause CorrectionOther Engine OILPoor cut Husqvarna Rotary Lawn Mower - Model Number Repair Parts54583 Screw, Hex Head 150406 Husqvarna Rotary Lawn Mower - Model Number 404142 Drive Control Assembly Includes Cable 191636 Briggs & Stratton 4-CYCLE Engine Carburetor KEY Part Description 691242 Pin-Float Hinge Service Notes Get it fixed, at your home or ours

917.37581 specifications

The Husqvarna 917.37581 is a robust and efficient lawn tractor that combines advanced technology with user-friendly design, making it an ideal choice for homeowners looking to maintain their lawns with ease. This riding mower is designed for residential use, ensuring that lawn care is not only effective but also enjoyable.

One of the standout features of the Husqvarna 917.37581 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this lawn tractor delivers sufficient power for tackling various lawn sizes and terrains. The engine operates smoothly, ensuring consistent performance that can handle both flat and hilly landscapes without compromising the cutting quality.

Another notable characteristic is the 42-inch cutting deck. This size strikes a balance between maneuverability and efficiency, allowing users to cover a considerable area without sacrificing the precision of cuts. The cutting height is adjustable, providing flexibility to adapt to different grass types and user preferences. The deck is designed for optimal airflow, which enhances the grass clipping dispersal, leading to a cleaner and healthier lawn.

The Husqvarna 917.37581 features a hydrostatic transmission, which simplifies the operation of the mower. Users can shift speeds seamlessly without the need for manual gear changes. This technology ensures a smoother ride and enhanced control, making it easier to navigate through tight spaces and around obstacles.

Additionally, the tractor is equipped with a comfortable seat and an ergonomic steering wheel, promoting an enjoyable mowing experience. The design includes easy-to-use controls that allow users to operate various functions without distraction, further enhancing efficiency.

For added convenience, the Husqvarna 917.37581 comes with an optional bagging system and mulching capabilities. These features allow homeowners to collect grass clippings neatly or mulch them back into the lawn, returning essential nutrients to the soil.

Durability is another key aspect of the Husqvarna brand, and the 917.37581 is no exception. Constructed with high-quality materials, the mower is built to withstand the rigors of regular use, ensuring longevity and reliability.

In conclusion, the Husqvarna 917.37581 lawn tractor is an excellent choice for anyone seeking a powerful, versatile, and user-friendly machine for lawn maintenance. With its strong engine, adjustable cutting deck, hydrostatic transmission, and comfortable design, it stands out as a dependable solution for achieving a well-manicured lawn.
Top Page Image Contents