Husqvarna 96045001900 owner manual Table of Contents

Page 4

PRODUCT SPECIFICATIONS

Gasoline Capacity

3 Gallons

 

and type:

Unleaded Regular

Oil Type (API-SG-SL):

SAE 30 (above 32°F)

 

SAE 5W-30 (below 32°F)

Oil Capacity:

w/Filter:

64 oz

 

w/o Filter:

60 oz

Spark Plug:

Champion

QC12YC

 

(Gap: .040")

 

Ground Speed (MPH):

Forward:

0 – 5.5

 

Reverse:

0 – 2.4

Charging System:

16 AMPS @ 3600 RPM

 

 

 

Battery:

AMP/HR:

28

 

MIN. CCA:

230

 

Case Size:

U1R

Blade Bolt Torque:

45-55 FT. LBS.

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily rem- edy, please contact your nearest authorized servicecenter/ department We have competent, well-trained technicians and the proper tools to service or repair this tractor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your tractor.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

WARNING: This tractor is equipped with an internal com- bustion engine and should not be used on or near any un- improved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

A spark arrester for the muffler is available through your nearest authorized service center/department (See REPAIR PARTS section of this manual).

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4

ASSEMBLY

5-6

OPERATION

7-13

MAINTENANCE SCHEDULE

14

MAINTENANCE

14-17

SERVICE AND ADJUSTMENTS

18-25

STORAGE

26

TROUBLESHOOTING

27-28

REPAIR PARTS

29-43

WARRANTY

BACK PAGE

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents YTH2348 Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Assembly Tools Required for AssemblyUnassembled Parts To Remove Tractor from CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor To SET Parking Brake See FigStopping To USE Throttle Control D See FigTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigTo Move Forward and Backward See Fig To USE Cruise Control J See FigService REMINDER/HOUR Meter Using the Reverse Operation SystemReverse Operation System ROS See Fig To Operate on HillsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Purge TransmissionMaintenance Lubrication ChartBattery TractorBlade Care Brake OperationEngine BeltsTransaxle Cooling Transaxle Pump FluidCleaning To Install Mower See Figs Service and AdjustmentsTo Remove Mower See Fig First Install ANTI-SWAY BAR S LBF To Level Mower To Replace Mower Blade Drive Belt See Fig Mower Drive Belt InstallationMower Drive Belt Removal Belt Installation To Replace Motion Drive Belt See FigTo Check Brake Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery Replacing Battery See FigTo Remove Wheel for Repairs See Fig To Attach Jumper CablesTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Engine dies when Schematic Tractor Model NO. YTH2348 96045001900, Product no 45Electrical KEY Part Description Chassis Tractor Model NO. YTH2348 96045001900, Product no 45 Drive 197 196Tractor Model NO. YTH2348 96045001900, Product no 45 Engine Spark Arrester KIT1837 Engine Power Rating Information Steering Assembly Seat Assembly 532 40 SeatMower Deck 532 40 Deck Weldment Mower Mower Lift Decals Wheels and TiresService Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Warranty Statement

96045001900 specifications

The Husqvarna 96045001900 is a versatile and robust chainsaw designed to meet the demands of both professionals and enthusiasts in the field of forestry and landscaping. Its powerful engine and advanced features make it an ideal choice for various cutting tasks, whether for maintenance, tree felling, or pruning.

One of the standout features of this chainsaw is its high-performance engine. The Husqvarna 96045001900 is equipped with a reliable and efficient 50.2cc engine, which delivers exceptional power and speed. This engine not only provides the necessary torque for cutting through tough materials but also ensures that users can complete their tasks with minimal effort.

The chainsaw boasts a lightweight design, which enhances maneuverability without sacrificing durability. Weighing in at just about 11 lbs, it allows users to handle it with ease during extended periods of operation. The ergonomic handle contributes to this comfort, offering a secure grip that reduces fatigue, especially during larger jobs.

Another essential aspect of the Husqvarna 96045001900 is its advanced air filtration system. This feature helps in maintaining engine performance by keeping dust and debris out of the engine, thereby prolonging its lifespan and reducing maintenance needs. In addition, the chainsaw is designed with an automatic oiling system, ensuring that the chain is consistently lubricated for optimal performance.

The chainsaw also incorporates Husqvarna’s unique X-Torq technology, which reduces fuel consumption and minimizes exhaust emissions. This environmentally friendly innovation not only contributes to lower operating costs but also meets stringent emission regulations, making it suitable for use in eco-sensitive areas.

Safety features are paramount in the design of the Husqvarna 96045001900. It comes equipped with a chain brake that stops the chain immediately in case of kickback, ensuring user safety. Furthermore, the front hand guard and throttle lockout prevent accidental starts and provide additional protection while operating the saw.

In conclusion, the Husqvarna 96045001900 is a high-quality chainsaw that excels in power, efficiency, and safety. With its powerful engine, lightweight construction, advanced air filtration, and cutting-edge technologies, it stands out as a top choice for anyone looking to tackle tough cutting jobs with ease and confidence. Whether for professional forestry work or home landscaping projects, this chainsaw delivers performance and reliability that make it a worthy investment.
Top Page Image Contents