Operations possible during playback
Setting the sleep timer
Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).
The sleep timer can be set to up to 90 minutes, in steps of 10 minutes.
Press [SLEEP] during playback and select the setting time.
•Press the button to select the setting time.
•After about 5 seconds, the setting is entered and the display returns to as it was before.
nCanceling the sleep timer
Either press [SLEEP] to select “SLEEP1OFF” or press ON/
STANDBY.
nTo check the time remaining until the sleep timer is activated
CD playback
This section explains how to playback CDs.
Before playing a disc
1Press ON/STANDBY.
2Press <INPUT> and op to select to “ ” or press
[DISC].
If no disc is loaded “No Disc” is displayed.
3Insert a disc (vpage 3).
•Press <5> to open/close the disc tray.
•The disc tray also closes when 1/3 is pressed.
NOTE
• Do not place any foreign objects in the disc tray. Doing so could |
damage it. |
ENGLISH
nTo play the desired track (remote control only)
Press [NUMBER] (0 – 9, +10) to select the track.
GExampleH Track 4 | : [4] |
GExampleH Track 12 | : [+10], [2] |
GExampleH Track 20 | : [+10], [+10], [0] |
Playing repeatedly (Repeat playback)
Press [REPEAT].
Playback in the respective repeat mode starts.
Repeat off
(indicator turns off)
Getting Started Connections Basic Operations Advanced Operations
Press [SLEEP].
• Do not push the disc tray in by hand when the power is turned off. |
Doing so could damage the set. |
[Selectable items]
1
Only 1 track plays repeatedly.
Information
Switching the display’s brightness
Press [DIMMER].
100% 75%
Playing CDs
Press 1/3.
The “1” indicator lights and playback begins.
ALL
Repeat off (indicator turns off)
All tracks play repeatedly.
Normal playback resumes.
Explanation
Off 25% 50%
• The display’s brightness switches each time the button is pressed.
If you operate the buttons when the display’s brightness is set to “Off”, the display temporarily lights at 25% brightness level.
• If the input source is set to something other than “ ”, press
[DISC] to switch the input source to “ | ”. |
•The input source can also be switched to “ ” using <INPUT> (vpage 12).
Playing random order (Random playback)
1 In the stop mode, press [RANDOM]. The “” is displayed.
2 Press 1/3.
The tracks start playing in random order.
terms Troubleshooting
Listening with headphones
Plug the headphones (sold separately) into the <PHONES>.
• The sound from the speakers is automatically cut off.
NOTE
To prevent hearing loss, do not raise the volume level excessively when using headphones.
nStopping playback
Press 2.
nStopping playback temporarily
Press 1/3.
3 is displayed.
• To resume playback, press 1/3.
During playback, press and hold in [6, 7].
nMoving to the beginning of tracks (skipping)
During playback, press 8, 9.
•The disc skips as many tracks as times the button is pressed.
•When you press reverse once, playback returns to the beginning of the current track.
If [REPEAT] is pressed during random playback, after the current session of random playback is finished, another session in a different order of tracks starts.
NOTE
Random play cannot be set or canceled during playback.
nCanceling random playback
While stopped, press [RANDOM].
The “” turns off.
Specifications Index
13