ENGLISH
Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the unit, and be sure to connect the channels and polarities correctly.
Setting the others [Other]
Adjusting the audio level balance between speakers A and B
With the output of Speaker A fixed, the audio level of Speaker B can be adjusted within the range
1 Press [MENU].
o/p u/i <ENTER> | 8、9 <5> 13 |
| |
ON/STANDBY | <VOLUME df> |
| |
|
| ON/STANDBY |
|
[iPod/USB] |
| [DISC] |
|
[TUNER] |
|
| |
| 13 | ||
|
|
| |
8 |
| 9 |
|
[MENU] |
| [MODE] |
|
| [ENTER/MEMO] |
| |
u |
|
| |
o |
| p |
|
i |
|
|
|
|
| [NUMBER] |
|
Turns on the Menu settings mode and the Menu appears on the display. (vpage 26 “Menu map”)
2Use ui to select
<ENTER> or p.
3Use ui to ajust volume offset, then press [ENTER/ MEMO], <ENTER> or p.
[Adjustable range]
-6 dB, 0 dB, +6 dB
Setting AMP characteristics
• Amp properties can be changed according to the location speakers are installed.
• Five types of characteristics can be selected.
• Different characteristics can be selected for Speaker A and Speaker B.
1 Press [MENU].
Turns on the Menu settings mode and the Menu appears on the display. (vpage 26 “Menu map”)
2Use ui to select
3Use ui to select the characteristics you want to set, then press [ENTER/MEMO], <ENTER> or p.
[Selectable items]
FLAT Properties are flat. (Default)
This enhances bass frequencies when speakers are placed directly on furniture or on a rack.
If you feel that there is too much bass, select your favorite properties from among RESPONSE1 to RESPONSE4.
34 |
RESPONSE 1
RESPONSE 2
RESPONSE 3
RESPONSE 4
Cuts low frequencies 60 Hz or under by
Cuts low frequencies 100 Hz or under by
Cuts low frequencies 60 Hz or under by
Cuts low frequencies 100 Hz or under by