Husqvarna 372XP, 365 manual Starting and Stopping, Starting and stopping, Cold engine, Warm engine

Page 27

STARTING AND STOPPING

Starting and stopping

WARNING! Note the following before

!starting:

Never start a chain saw unless the bar, chain and all covers are fitted correctly. Otherwise the clutch can come loose and cause personal injuries.

Always move the machine away from the refuelling area before starting.

Place the machine on firm ground. Make sure you have a secure footing and that the chain cannot touch anything.

Keep people and animals well away from the working area.

Cold engine

Starting: The chain brake must be engaged when the chain saw is started. Activate the brake by moving the front hand guard forwards.

Ignition: Slide the ignition switch to the left.

Choke: Set the choke control in the choke position.

Start throttle: The correct choke/start throttle setting is obtained by moving the control to the choke position.

If the machine is fitted with a decompression valve (A): Press the valve to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine. Once the machine has started the valve will automatically return to its original setting.

A

Warm engine

Use the same procedure as for starting a cold engine but without setting the choke control in the choke position. The correct choke/start throttle setting is obtained by moving the choke control to the choke position and then pushing it in again.

Starting

Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle. Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly. Never twist the starter cord around your hand.

As the chain brake is still engaged the speed of the engine must be set to idling as soon as possible, this is achieved by quickly disengaging the throttle lock. This prevents unnecessary wear to the clutch, clutch drum and brake band.

Push in the choke control as soon as the engine fires and keep pulling until the engine starts. When the engine starts, quickly apply full throttle; the throttle start lock will automatically disengage.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

English – 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 362XP 365 372XP Key to symbols KEY to SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guard Right hand guard Stop switchThrottle lock Chain catcherChecking the inertia brake release MufflerChecking brake band wear Checking the front hand guardRight hand guard Stop switchThrottle lock Chain catcherMuffler Cutting equipmentGeneral rules Cutting equipment designed to minimise kickbackSome terms that describe the bar and chain ChainWith a badly sharpened chain Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Sharpening cutting teethIf the raker clearance is too large General advice on setting raker clearanceSetting the raker clearance Tensioning the chainChecking chain lubrication Lubricating cutting equipmentChain oil Filling with chain oilChain drive sprocket Lubricating the bar tip sprocketNeedle bearing lubrication Checking wear on cutting equipmentHow to avoid kickback What is kickback?Do not let go of the handles General safety precautions Fuel safety StartingTransport and storage General Basic safety rulesGeneral working instructions Basic cutting techniqueCutting TermsFelling direction Tree felling techniqueLimbing Safe distanceFelling Directional cutsFelling cut Freeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting the trunk into logsWhat is what on the chain saw? What is WHAT?Working with the chain AssemblyFitting the bar and chain Fitting a spike bumperFuel Fuel HandlingMin 3 m 10ft FuellingWarm engine Starting and StoppingStarting and stopping Cold engineStopping Carburettor MaintenanceChanging a broken or worn starter cord Correctly adjusted carburettorStarter High speed jet HChanging a broken recoil spring Air filterSpark plug Tensioning the recoil springNeedle bearing lubrication Adjustment of the oil pumpWhen making adjustments MufflerWinter use Air Injection centrifugal cleaningHeated handles Electrical carburettor heatingBelow you will find some general maintenance instructions Daily maintenanceWeekly maintenance Monthly maintenanceTechnical data Technical DataBar Chain Bar and chain combinationsEC-declaration of conformity Applies to Europe onlyEN292-2, Cispr 121997, EN608 ´z+H4¶6j¨ Page 1140206-26 ´z+H4¶6j¨ ´z+H4¶6j¨
Related manuals
Manual 4 pages 16.24 Kb

372XP, 365 specifications

The Husqvarna 365 and 372XP chainsaws are powerful and versatile tools designed for both professional loggers and serious homeowners. Known for their robust construction and reliability, these models offer a perfect blend of performance and user-friendly features.

The Husqvarna 365 is equipped with a 70.7 cc engine that delivers impressive power, making it suitable for demanding cutting tasks. This chainsaw is designed for all-day use, ensuring that operators can tackle large trees and tough woods without losing momentum. The engine utilizes Smart Start technology, which allows for easier starting with minimal effort. This innovation reduces the resistance in the starter cord by up to 40%, enabling rapid and hassle-free ignition.

On the other hand, the Husqvarna 372XP boasts a slightly larger 72.2 cc engine, making it one of the most powerful saws in the market. Specifically tailored for professionals, this chainsaw excels in heavy-duty applications and has the ability to handle extreme workloads. Both models are designed with a high RPM, ensuring smooth cutting performance and efficient chip flow, which contributes to cleaner cuts and enhanced productivity.

A significant feature of these chainsaws is their ergonomic design, which includes a comfortable handle for better grip and control during operation. The chainsaws also feature an adjustable oil pump that allows users to customize the oil flow for the chain and bar, which helps minimize wear and prolongs the lifespan of the saw.

Safety is paramount with both the 365 and 372XP models. They are equipped with a chain brake system that automatically stops the chain in the event of kickback, ensuring user protection. Furthermore, the low vibration technology significantly reduces vibrations experienced by the operator, promoting comfort during prolonged use.

In terms of maintenance, both chainsaws come with a quick-release air filter that makes it easy to access and clean, ensuring optimal engine performance over time. The built-in fuel pump facilitates easier starting after long periods of inactivity, making these tools reliable for various cutting tasks.

In summary, the Husqvarna 365 and 372XP chainsaws stand out for their powerful engines, user-friendly features, and advanced safety technologies. They are engineered to meet the high demands of professional users while also being accessible for those who need a reliable chainsaw for home use. Whether for felling trees or limbing, these models deliver excellence in performance and durability.
Top Page Image Contents