Husqvarna 395XPG, 1153177-95 manual Contents

Page 4

CONTENTS

Contents
KEY TO SYMBOLS
Symbols on the machine:	2
Symbols in the operator’s manual:	2
CONTENTS
Contents	4
INTRODUCTION
Dear customer!	5
WHAT IS WHAT?
What is what on the chain saw?	6
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw	7
Important	7
Always use common sense	8
Personal protective equipment	8
Machine′s safety equipment	8
Cutting equipment	11
ASSEMBLY
Fitting the bar and chain	17
FUEL HANDLING
Fuel	18
Fueling	19
Fuel safety	19
STARTING AND STOPPING
Starting and stopping	20
WORKING TECHNIQUES
Before use:	22
General working instructions	22
How to avoid kickback	28
MAINTENANCE
Carburetor adjustment	30
Checking, maintaining and servicing chain saw
safety equipment	31
Mufﬂer	33
Starter	34
Air ﬁlter	35
Spark plug	35
Lubricating the bar tip sprocket	35
Needle bearing lubrication	36
Adjustment of the oil pump	36
Cooling system	36
”Air Injection” centrifugal cleaning	36
Winter use	37
Heated handles	37
Maintenance schedule	38
TECHNICAL DATA
Technical data	39
Saw chain ﬁling and ﬁle gauges	40
4 – English

FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND
OBLIGATIONS	41
AMERICAN STANDARD SAFETY
PRECAUTIONS
Safety precautions for chain saw users	43

Image 4

Contents 395XP 395XPG Symbols on the machine KEY to SymbolsSymbols in the operator’s manual EPA Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Chain catcher Throttle lockoutRight hand guard Stop switch Cutting equipmentVibration damping system MufﬂerBar Cutting equipment designed to reduce kickbackChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethIncreased if the depth gauge setting is Adjustment of depth gauge settingTensioning the chain Too largeLubricating cutting equipment Filling with chain oilChecking chain lubrication Chain drive sprocketNeedle bearing lubrication Checking wear on cutting equipmentFitting the bar and chain AssemblyWorking with the chain Fuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique TermsLimbing Tree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cutWhat is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentFine adjustment of the idling speed T Correctly adjusted carburetorHigh speed jet H Checking brake band wearChecking the inertia brake release ImmediatelyMufﬂer Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil springAir ﬁlter Spark plugLubricating the bar tip sprocket Fitting the starterAdjustment of the oil pump Air Injection centrifugal cleaningWhen making adjustments Needle bearing lubricationWinter use Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain ﬁling and ﬁle gauges 050/1,3 mm058/1,5 mm 063/1,6 mmFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsEmission Controlwarranty Parts List American Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautionsOriginal instructions 1153177-95