Husqvarna 362XP manual Lubricating cutting equipment

Page 14

GENERAL SAFETY PRECAUTIONS

Lubricating cutting equipment

WARNING! Poor lubrication of cutting

!equipment may cause the chain to snap, which could lead to serious, even fatal injuries.

Chain oil

Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather.

As a chain saw manufacturer we have developed an optimal chain oil which has a vegetable oil base. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage. If our own chain oil is not available, standard chain oil is recommended.

Never use waste oil! Using waste oil can be dangerous to you and damage the machine and environment.

IMPORTANT! When using vegetable based saw chain oil, dismantle and clean the groove in the bar and saw chain before long-term storage. Otherwise there is a risk of the saw chain oil oxidizing, which will result in the saw chain becoming stiff and the bar tip sprocket jamming.

Filling with chain oil

•All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The saw chain oil tank and the fuel tank are designed so that the fuel runs out before the saw chain oil.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a lean mixture may mean that the fuel lasts longer than the oil) and that you also use the recommended cutting equipment (a bar that is too long will use more chain oil).

Checking chain lubrication

•Check the chain lubrication each time you refuel. See instructions under the heading Lubricating the bar tip sprocket.

Aim the tip of the bar at a light coloured surface about 20 cm (8 inches) away. After 1 minute running at 3/4 throttle you should see a distinct line of oil on the light surface.

If the chain lubrication is not working:

•Check that the oil channel in the bar is not obstructed. Clean if necessary.

•Check that the groove in the edge of the bar is clean. Clean if necessary.

•Check that the bar tip sprocket turns freely and that the lubricating hole in the tip sprocket is not blocked. Clean and lubricate if necessary.

If the chain lubrication system is still not working after carrying out the above checks and associated measures you should contact your servicing dealer.

Chain drive sprocket

The clutch drum is fitted with one of the following drive sprockets:

ASpur sprocket (the chain sprocket is welded on the drum)

BRim sprocket (replaceable)

Regularly check the degree of wear on the drive sprocket. Replace if wear is excessive. Replace the drive sprocket whenever you replace the chain.

Needle bearing lubrication

Both versions of sprockets have a needle bearing on the drive shaft, which has to be greased regularly (once a week). CAUTION! Use only high quality bearing grease or engine oil.

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 362XP Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesChain Cutting equipment designed to reduce kickbackBar Some terms that describe the bar and chainSharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Lubricating cutting equipment Checking wear on cutting equipment Assembly Fitting the bar and chainFuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Terms Basic cutting techniqueGeneral Limbing CuttingFelling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatFelling Directional cutsFreeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tensionCutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburetor adjustment Checking the front hand guard Correctly adjusted carburetorChecking brake band wear Checking the inertia brake releaseThrottle lock Changing a broken or worn starter cord MufflerStarter Tensioning the recoil spring Air filterSpark plug Changing a broken recoil springLubricating the bar tip sprocket Adjustment of the oil pumpAir Injection centrifugal cleaning Needle bearing lubricationElectrical carburetor heating Temperature -5C 23F or colderHeated handles CanadaMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain filing and file gauges Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsKickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautionsPage 1150061-95 ´z+R&3¶5w¨ ´z+R&3¶5w¨

362XP specifications

The Husqvarna 362XP is a professional-grade chainsaw designed to meet the demanding needs of forestry workers, landscapers, and tree care professionals. Known for its robust performance and reliability, the 362XP is a powerful tool that balances performance with user comfort.

One of the standout features of the Husqvarna 362XP is its engine. It is equipped with a potent 60.3 cc, 2-stroke engine that provides high power output while remaining lightweight, making it ideal for extended use in the field. This chainsaw is designed with an X-Torq engine technology, which not only delivers reduced fuel consumption but also minimizes emissions, making it more environmentally friendly. The engine's design contributes to its excellent torque over a wide rpm range, allowing for efficient cutting in various materials.

The Husqvarna 362XP boasts an easy-start system, which is particularly beneficial in cold conditions. The Smart Start technology ensures that the saw starts with minimal effort, allowing users to get to work quickly. Coupled with a powerful ignition system, the chainsaw provides reliable performance that is consistent and dependable.

Another significant feature of the 362XP is its ergonomic design. The handle is designed for optimal grip and comfort, reducing user fatigue during long working hours. The anti-vibration technology integrated into the chainsaw minimizes vibrations transferred to the user's hands, further enhancing comfort and control while operating the machine.

The chainsaw is equipped with a lightweight, durable guide bar and a high-quality chain, designed to set the standard for cutting capabilities. The chain tensioning system is easy to use and allows for quick adjustments without the need for additional tools. This feature is essential for professionals who need to stay efficient while working on the job.

Safety is a priority with the Husqvarna 362XP, which includes features like a chain brake that activates in case of kickback and reinforced protective features to minimize the risk of injury. Additionally, the air filter system offers excellent filtration to ensure the engine runs smoothly in a variety of conditions.

In summary, the Husqvarna 362XP is a cutting-edge chainsaw engineered for performance, comfort, and safety. Its combination of advanced technology, powerful engine, ergonomic design, and superior safety features make it a top choice for professionals in need of a reliable and efficient cutting tool. Whether dealing with heavy-duty tasks or delicate trimming, the 362XP proves to be a formidable companion in any arborist's toolkit.
Top Page Image Contents