Fuel Handling

Fuel

Note! The machine is equipped with a two-stroke engine and must always be run using a mixture of gasoline and two- stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

Gasoline

•Use good quality unleaded gasoline.

•CAUTION! Engines equipped with catalytic converters must be run on unleaded fuel mixtures.

•Leaded gasoline will destroy the catalytic converter and it will no longer serve its purpose. The green fuel cap on saws ﬁtted with catalytic converters means that only unleaded gasoline can be used.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working with continuous high revs (e.g. limbing) a higher octane is recommended.

Environment fuel

HUSQVARNA recommends the use of alkylate fuel or environmental fuel for four-stroke engines blended with two- stroke oil as set out below. Note that carburetor adjustment may be necessary when changing the type of fuel (see instructions under the heading Carburetor).

Running-in

Avoid running at a too high speed for extended periods during the ﬁrst 10 hours.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

Mixing ratio

1:50 (2%) for all engines.

Gasoline, litre	Two-stroke oil, litre

	2% (1:50)

5	0,10

10	0,43/0,20

15	0,30

20	0,40

US gallon	US ﬂ. oz.

1	2 1/2

2 1/2	6 1/2

5	12 7/8

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by ﬁlling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before ﬁlling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

Chain oil

•We recommend the use of special oil (chain oil) with good adhesion characteristics.

•Never use waste oil. This results in damage to the oil pump, the bar and the chain.

•It is important to use oil of the right grade (suitable viscosity range) to suit the air temperature.

•In temperatures below 0°C (32°F) some oils become too viscous. This can overload the oil pump and result in damage to the oil pump components.

•Contact your service agent when choosing chain oil.

English – 17

362XP specifications

The Husqvarna 362XP is a professional-grade chainsaw designed to meet the demanding needs of forestry workers, landscapers, and tree care professionals. Known for its robust performance and reliability, the 362XP is a powerful tool that balances performance with user comfort.

One of the standout features of the Husqvarna 362XP is its engine. It is equipped with a potent 60.3 cc, 2-stroke engine that provides high power output while remaining lightweight, making it ideal for extended use in the field. This chainsaw is designed with an X-Torq engine technology, which not only delivers reduced fuel consumption but also minimizes emissions, making it more environmentally friendly. The engine's design contributes to its excellent torque over a wide rpm range, allowing for efficient cutting in various materials.

The Husqvarna 362XP boasts an easy-start system, which is particularly beneficial in cold conditions. The Smart Start technology ensures that the saw starts with minimal effort, allowing users to get to work quickly. Coupled with a powerful ignition system, the chainsaw provides reliable performance that is consistent and dependable.

Another significant feature of the 362XP is its ergonomic design. The handle is designed for optimal grip and comfort, reducing user fatigue during long working hours. The anti-vibration technology integrated into the chainsaw minimizes vibrations transferred to the user's hands, further enhancing comfort and control while operating the machine.

The chainsaw is equipped with a lightweight, durable guide bar and a high-quality chain, designed to set the standard for cutting capabilities. The chain tensioning system is easy to use and allows for quick adjustments without the need for additional tools. This feature is essential for professionals who need to stay efficient while working on the job.

Safety is a priority with the Husqvarna 362XP, which includes features like a chain brake that activates in case of kickback and reinforced protective features to minimize the risk of injury. Additionally, the air filter system offers excellent filtration to ensure the engine runs smoothly in a variety of conditions.

In summary, the Husqvarna 362XP is a cutting-edge chainsaw engineered for performance, comfort, and safety. Its combination of advanced technology, powerful engine, ergonomic design, and superior safety features make it a top choice for professionals in need of a reliable and efficient cutting tool. Whether dealing with heavy-duty tasks or delicate trimming, the 362XP proves to be a formidable companion in any arborist's toolkit.