Husqvarna 362XP Maintenance schedule, Daily maintenance Weekly maintenance Monthly maintenance

Page 36

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain brake

 

for wear. Replace when less than 0.6 mm

Clean the outside of the machine.

converter, check the cooling system

(0,024 inch) remains at the most worn

 

weekly.

 

point.

 

 

 

 

 

Check that the components of the throttle

Check the starter, starter cord and return

Check the clutch centre, clutch drum and

control work safely. (Throttle lock and

spring.

clutch spring for wear.

throttle control.)

 

 

 

 

 

Clean the chain brake and check that it

 

 

operates safely. Make sure that the chain

Check that the vibration damping

Clean the spark plug. Check that the

catcher is undamaged, and replace it if

elements are not damaged.

electrode gap is 0.5 mm (0,020 inch).

necessary.

 

 

 

 

 

The bar should be turned daily for more

 

 

even wear. Check the lubrication hole in

 

 

the bar, to be sure it is not clogged. Clean

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

the bar groove. If the bar has a sprocket

 

 

tip, this should be lubricated.

 

 

 

 

 

Check that the bar and chain are getting

File off any burrs from the edges of the

Check fuel hose for cracks or other

sufficient oil.

bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to visible

 

 

cracks in the rivets and links, whether the

Clean or replace the spark arrestor mesh

 

saw chain is stiff or whether the rivets and

Empty the fuel tank and clean the inside.

links are abnormally worn. Replace if

on the muffler.

 

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its tension

 

 

and condition. Check the drive sprocket

Clean the carburetor compartment.

Empty the oil tank and clean the inside.

for excessive wear and replace if

 

 

necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if necessary.

Check all cables and connections.

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks from

 

 

the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic converter,

 

 

check the cooling system daily.

 

 

 

 

 

36 – English

Page 35 Page 37
Image 36
Page 35 Page 37
Contents 362XP KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Throttle lock Chain catcherRight hand guard Vibration damping systemStop switch Cutting equipmentMuffler General rulesCutting equipment designed to reduce kickback BarChain Some terms that describe the bar and chainSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethSharpening cutting teeth General advice on adjusting depth gauge setting Adjustment of depth gauge settingTensioning the chain Lubricating cutting equipment Checking wear on cutting equipment Assembly Fitting the bar and chainFuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique GeneralTerms Limbing CuttingTree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreatFelling Directional cutsGeneral advice Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Correctly adjusted carburetor Checking brake band wearChecking the front hand guard Checking the inertia brake releaseThrottle lock Muffler StarterChanging a broken or worn starter cord Air filter Spark plugTensioning the recoil spring Changing a broken recoil springAdjustment of the oil pump Air Injection centrifugal cleaningLubricating the bar tip sprocket Needle bearing lubricationTemperature -5C 23F or colder Heated handlesElectrical carburetor heating CanadaMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain filing and file gauges Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsAmerican Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautionsPage 1150061-95 ´z+R&3¶5w¨ ´z+R&3¶5w¨

362XP specifications

The Husqvarna 362XP is a professional-grade chainsaw designed to meet the demanding needs of forestry workers, landscapers, and tree care professionals. Known for its robust performance and reliability, the 362XP is a powerful tool that balances performance with user comfort.

One of the standout features of the Husqvarna 362XP is its engine. It is equipped with a potent 60.3 cc, 2-stroke engine that provides high power output while remaining lightweight, making it ideal for extended use in the field. This chainsaw is designed with an X-Torq engine technology, which not only delivers reduced fuel consumption but also minimizes emissions, making it more environmentally friendly. The engine's design contributes to its excellent torque over a wide rpm range, allowing for efficient cutting in various materials.

The Husqvarna 362XP boasts an easy-start system, which is particularly beneficial in cold conditions. The Smart Start technology ensures that the saw starts with minimal effort, allowing users to get to work quickly. Coupled with a powerful ignition system, the chainsaw provides reliable performance that is consistent and dependable.

Another significant feature of the 362XP is its ergonomic design. The handle is designed for optimal grip and comfort, reducing user fatigue during long working hours. The anti-vibration technology integrated into the chainsaw minimizes vibrations transferred to the user's hands, further enhancing comfort and control while operating the machine.

The chainsaw is equipped with a lightweight, durable guide bar and a high-quality chain, designed to set the standard for cutting capabilities. The chain tensioning system is easy to use and allows for quick adjustments without the need for additional tools. This feature is essential for professionals who need to stay efficient while working on the job.

Safety is a priority with the Husqvarna 362XP, which includes features like a chain brake that activates in case of kickback and reinforced protective features to minimize the risk of injury. Additionally, the air filter system offers excellent filtration to ensure the engine runs smoothly in a variety of conditions.

In summary, the Husqvarna 362XP is a cutting-edge chainsaw engineered for performance, comfort, and safety. Its combination of advanced technology, powerful engine, ergonomic design, and superior safety features make it a top choice for professionals in need of a reliable and efficient cutting tool. Whether dealing with heavy-duty tasks or delicate trimming, the 362XP proves to be a formidable companion in any arborist's toolkit.
Top Page Image Contents