Husqvarna 362XP American Standard Safety Precautions, Safety precautions for chain saw users

Page 40

AMERICAN STANDARD SAFETY PRECAUTIONS

Safety precautions for chain saw users

(ANSI B 175.1-2000 Annex C)

Kickback safety precautions

WARNING! Kickback may occur when the

!nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the saw which could result in serious personal injury.

Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.

With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.

Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go.

Make sure that the area in which you are cutting is free from obstacles. Do not let the nose of the guide bar contact a log, branch, or any other obstacle which could be hit while you are operating the saw.

Cut at high engine speeds.

Do not overreach or cut above shoulder height.

Follow manufacturer’s sharpening and maintenance instructions for the saw chain.

Only use replacement bars and chains specified by the manufacturer or the equivalent.

Other safety precautions

WARNING! Do not operate a chain saw with

!one hand! Serious injury to the operator, helpers, bystanders or any combination of these persons may result from one-handed operation. A chain saw is intended for two- handed use.

Do not operate a chain saw when you are fatigued.

Use safety footwear; snug-fitting clothing, protective gloves, and eye, hearing and head protection devices.

Use caution when handling fuel. Move the chain saw at least 10 feet (3 m) from the fueling point before starting the engine.

Do not allow other persons to be near the chain saw when starting or cutting with the chain saw. Keep bystanders and animals out of the work area.

Do not start cutting until you have a clear work area, secure footing and a planned retreat path from the falling tree.

Keep all parts of your body away from the saw chain when the engine is running.

Before you start the engine, make sure that the saw chain is not contacting anything.

Carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler away from your body.

Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

Shut off the engine before setting the chain saw down.

Use extreme caution when cutting small size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.

When cutting a limb that is under tension be alert for springback so that you will not be struck when the tension in the wood fibers is released.

Keep handles dry, clean and free of oil or fuel mixture.

Operate the chain saw only in well-ventilated areas.

Do not operate a chain saw in a tree unless you have been specifically trained to do so.

Do not operate a chain saw above shoulder height.

All chain saw service, other than the items listed in the operator’s/owner’s safety and maintenance instructions, should be performed by competent chain saw service personnel. (For example, if improper tools are used to remove the flywheel or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur and subsequently cause the flywheel to burst.)

When transporting your chain saw, use the appropriate guide bar guard.

Note: This Annex is intended primarily for the consumer or occasional user.

40 – English

Page 39 Page 41
Image 40
Page 39 Page 41
Contents 362XP Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Throttle lock Chain catcherRight hand guard Vibration damping systemStop switch Cutting equipmentMuffler General rulesCutting equipment designed to reduce kickback BarChain Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingSharpening cutting teeth Adjustment of depth gauge setting General advice on adjusting depth gauge settingTensioning the chain Lubricating cutting equipment Checking wear on cutting equipment Assembly Fitting the bar and chainFuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules General Basic cutting techniqueTerms Limbing CuttingTree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreatFelling Directional cutsGeneral advice Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburetor adjustment MaintenanceGeneral Correctly adjusted carburetor Checking brake band wearChecking the front hand guard Checking the inertia brake releaseThrottle lock Starter MufflerChanging a broken or worn starter cord Air filter Spark plugTensioning the recoil spring Changing a broken recoil springAdjustment of the oil pump Air Injection centrifugal cleaningLubricating the bar tip sprocket Needle bearing lubricationTemperature -5C 23F or colder Heated handlesElectrical carburetor heating CanadaMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain filing and file gauges Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsAmerican Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautionsPage 1150061-95 ´z+R&3¶5w¨ ´z+R&3¶5w¨

362XP specifications

The Husqvarna 362XP is a professional-grade chainsaw designed to meet the demanding needs of forestry workers, landscapers, and tree care professionals. Known for its robust performance and reliability, the 362XP is a powerful tool that balances performance with user comfort.

One of the standout features of the Husqvarna 362XP is its engine. It is equipped with a potent 60.3 cc, 2-stroke engine that provides high power output while remaining lightweight, making it ideal for extended use in the field. This chainsaw is designed with an X-Torq engine technology, which not only delivers reduced fuel consumption but also minimizes emissions, making it more environmentally friendly. The engine's design contributes to its excellent torque over a wide rpm range, allowing for efficient cutting in various materials.

The Husqvarna 362XP boasts an easy-start system, which is particularly beneficial in cold conditions. The Smart Start technology ensures that the saw starts with minimal effort, allowing users to get to work quickly. Coupled with a powerful ignition system, the chainsaw provides reliable performance that is consistent and dependable.

Another significant feature of the 362XP is its ergonomic design. The handle is designed for optimal grip and comfort, reducing user fatigue during long working hours. The anti-vibration technology integrated into the chainsaw minimizes vibrations transferred to the user's hands, further enhancing comfort and control while operating the machine.

The chainsaw is equipped with a lightweight, durable guide bar and a high-quality chain, designed to set the standard for cutting capabilities. The chain tensioning system is easy to use and allows for quick adjustments without the need for additional tools. This feature is essential for professionals who need to stay efficient while working on the job.

Safety is a priority with the Husqvarna 362XP, which includes features like a chain brake that activates in case of kickback and reinforced protective features to minimize the risk of injury. Additionally, the air filter system offers excellent filtration to ensure the engine runs smoothly in a variety of conditions.

In summary, the Husqvarna 362XP is a cutting-edge chainsaw engineered for performance, comfort, and safety. Its combination of advanced technology, powerful engine, ergonomic design, and superior safety features make it a top choice for professionals in need of a reliable and efficient cutting tool. Whether dealing with heavy-duty tasks or delicate trimming, the 362XP proves to be a formidable companion in any arborist's toolkit.
Top Page Image Contents