OPERATION
Stopping
Emergency stop
Release both hands from the operator presence lever handles.
When both operator presence levers return to their outer position, the engine will quit and the mower will stop.
or
Pull both motion control levers firmly towards the handle grips and hold them securely in place. Use thumbs to lift the neutral bail up into the neutral slot. Then stop engine by pulling throttle control back and shut off the key switch.
Normal operating stop
1.Pull both motion control levers firmly toward the handle grips to stop forward motion.
2.Use thumbs to lift neutral bail into the neutral slots.
3.Move the throttle control to the slow position.
4.Move blade engagement control to the off position.
5.Stop engine, refer to “Stopping the Engine” on page 33.