Husqvarna WH4817EFQ2, WH5219EFQ manual Maintenance Schedule

MAINTENANCE

Maintenance

Maintenance Schedule

The following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by an authorized service workshop is recommended in order to maintain your machine in the best possible condition and to ensure safe operation.

Read Safety Instructions section “Safety Instructions” on page 7.

1)First change after 8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) For daily use, the machine should be lubricated twice weekly. 4) Performed by authorized service workshop.

z = Described in this manual = Not described in this manual

		Daily		Weekly	At	Maintenance interval
		mainte-		mainte-	least		in hours
		nance		nance	once
					each
Maintenance	Page	Before	After			25	50	100	300
					year
Check for fuel and oil leakages	-	
Check the engine’s oil level (every refueling)	52	z
Front and rear tires: Damage, Pressure	42					z
Check the fuel pump’s air filter	42					z
Check battery	37	z
Check the safety system	39	z
Check/clean the engine’s cooling air intake	40		z
Check the cutting deck	44					z
Check pump compartment	43	z
Check underside of rear deck	43		z
Check hardware (screws, nuts, etc.)	47		z
Start the engine and blades, listen for unusual	-		
sounds
Clean under the mower deck	47		z
Inspect/Replace blades 2)	48	z
Check the hydraulic system’s oil level	54	z
Check the condition of belts, belt pulleys, etc.	43				z	z
Check for damage	-		
Thoroughly clean around the engine	-		
Thoroughly clean around the hydraulic system	-		
Clean around belts, belt pulleys, etc.	-		
Clean the engine’s cooling air intake	40				z	z

English-35