Husqvarna W21K, W21SK, W21SBK, W53SBEK, W53SEK, W21KC, W21SKC, W21SBKC manual Transport

Page 13

SAFETY INSTRUCTIONS

•

Never make adjustments with the engine

 

 

running.

 

•

Ensure that nuts and bolts, especially the

 

 

fastening bolts for the blade attachments,

 

 

are properly tightened, torqued and that

 

 

the equipment is in good condition.

 

•

Do not modify safety equipment. Check

 

 

regularly to be sure it works properly.

 

 

The machine must not be used with

 

 

defective or unmounted protective

 

 

plates, protective cowlings, safety

 

 

switches, or other protective devices.

 

•

Do not change the settings of governors

 

 

and avoid running the engine with overly

 

 

high engine speeds. If you run the

 

 

engine too fast, you risk damaging the

8019-006

 

machine components.

Clean the unit regularly

•Never use the mower indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas.

•Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting.

•The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer.

•The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them.

•The mulch blades should only be used in familiar areas when higher quality mowing is desired.

•Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the machine. Allow the machine to cool before putting it in storage.

Transport

•The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer.

•Use an approved trailer to transport the mower. Fasten the machine with approved fastening devices, such as straps, chains, or ropes, when transporting.

English-12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operators Manual OPERATOR’S Manual Push Mower Safety InstructionsIntroduction Introduction Introduction Manufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Distance from Safety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Operating on SlopesDo not Children MaintenanceNever fill the fuel tank indoors Transport Customer responsibilities Controls ControlsFuel Shut Off Valve Engine SpeedOperator Presence Control OPC Choke Control All Models USE Full Throttle When MOWING, for best mower performanceThrottle Control All Models Blade Brake Control BBC Ground Drive Bail Cutting heightShut Off Engine To Empty Grass Catcher To Convert MowerEnglish-20 Before Starting Engine OperationTo Start Engine Mowing Transmission SelectorBlade in short cut grass or over a hard level Release OPC bail Self Propelled Models Only Set throttle control to high speed Push Models Only Mowing Tips Mulching Mowing Tips Maintenance MaintenanceMaintenance Schedule Before Each Use General RecommendationsIgnition System Checking the Engines Cooling Air Intake Checking and Adjusting the Throttle Cable and Choke Cable Inspection Replacing Air FilterChecking Tires Replacing the Fuel FilterDrive Wheels Checking the V-belts Always use protective gloves when handling the bladeChecking the Blade Gear Case Blade replacementClean Under Drive Cover CleaningGrass Catcher MufflerTo Adjust Handle Adjusting the Lawn MowerRear Deflector To Remove Drive BeltCleaning and Washing Engine AdjustmentHardware English-41 Lubrication Mower Lubrication ChartLubrication Engine LubricationTo Change Engine Oil Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-45 112280 R2 03/06/07
Top Page Image Contents