Husqvarna YTH18542 owner manual Cleaning

Page 18

MAINTENANCE

•Unlock drain valve by pushing inward and turning counterclockwise.

•To open, pull out on the drain valve.

•After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

•Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this man- ual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.Tighten cap onto the tube securely when finished.

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

AIR FILTER

Your engine will not run properly using a dirty air filter. Service air cleaner more often under dusty conditions. See Engine Manual.

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year.

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or dam- age.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

IN-LINE FUEL FILTER (See Fig. 14)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•With engine cool, remove filter and plug fuel line sec- tions.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

CLAMP

CLAMP

FUEL FILTER

FIG. 14

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 917.279060 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts Steering WheelSeat To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsCheck Engine OIL Level Before Starting the EngineTo Transport See Figs ADD GasolineMowing Tips Purge TransmissionAutomatic Transmission Warm UP General Recommendations MaintenanceLubrication Chart Before Each USETo Sharpen Blade See Fig TractorBlade Removal See Fig Check Operator Presence SystemEngine Cleaning To Level Mower Housing Service and AdjustmentsTo Install Mower See Fig To Remove Mower See FigBelt Installation To Replace Mower Blade Drive Belt See FigBelt Removal See Fig To Check and Adjust BrakeTransaxle Motion Control Lever Neutral Adjustment See Fig To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Engine dies when Schematic TRACTOR-MODEL Number YTH18542 917.279060, Product no 13Electrical KEY Part NO. NO. Description Chassis TRACTOR-MODEL Number YTH18542 917.279060, Product no 13 Drive TRACTOR-MODEL Number YTH18542 917.279060, Product no 13 Steering Assembly TRACTOR-MODEL Number YTH18542 917.279060, Product no 13 Engine Optional EquipmentMower Lift 1331Seat Assembly Decals Wheels and TiresMower Deck TRACTOR-MODEL Number YTH18542 917.279060, Product no 13 Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement 532 19 58-63 Rev 3.18.05 RD
Related manuals
Manual 17 pages 30.7 Kb

YTH18542 specifications

The Husqvarna YTH18542 is a versatile and efficient lawn mower designed to meet the needs of homeowners looking for a reliable and high-performing machine for maintaining their lawns. Its robust design and advanced features make it a popular choice among gardening enthusiasts and professionals alike.

One of the standout features of the YTH18542 is its powerful 18.5 HP Briggs & Stratton engine. This engine provides ample power to tackle various lawn conditions, ensuring that grass cutting is smooth and efficient. The engine is designed for durability and ease of maintenance, allowing users to focus more on mowing and less on upkeep.

The YTH18542 is equipped with a 42-inch cutting deck that boasts a reinforced structure for added longevity. This cutting deck offers a variety of cutting heights, adjustable with a simple lever, which allows users to achieve their desired grass length easily. The wide cutting path minimizes mowing time while providing a clean, even cut.

In terms of comfort, the tractor features an ergonomic design with a comfortable seat, making longer mowing sessions less taxing. The easy-to-use steering wheel provides excellent maneuverability, allowing the operator to navigate tight corners and obstacles within the yard smoothly. Additionally, the implementation of a pedal-operated hydrostatic transmission ensures seamless speed control without the need for manual gear shifting.

Husqvarna's commitment to innovation is evident in the design of the YTH18542. The machine features a tight turning radius, which enhances agility and efficiency when working around flower beds, trees, and slopes. The mower also supports attachments, enabling users to expand its functionality with tools such as baggers or mulchers, making it a multi-season investment.

The mower includes safety features like an automatic blade engagement, which instantly starts the cutting blades only when the operator is seated. This promotes safety and reduces the risk of accidents.

Lastly, the YTH18542 possesses an aesthetically pleasing design, with a bright orange finish that is striking in any landscape. Its combination of performance, comfort, and safety features makes the Husqvarna YTH18542 a top choice for anyone seeking efficiency and quality in lawn care. With its dependable performance and innovative technologies, this mower is well-suited for various yard sizes and complexities.
Top Page Image Contents