Marantz SA8004 Auto STB Auto standby mode, NniPod Ctrl Operating an iPod with its own controls

nnFile Info (File information display selection)

You can view file information when playing iPod files.

1 Select “iPod Setup =>” using [8] and [9], and press [ENTER].

2 Select “File Info =>” using [8] and [9], and press [ENTER].

3 Select the information you want to display using [8] and [9], and press [ENTER].

GSelectable itemsH

1.Title : The track name is displayed.

2.Artist : The artist name is displayed.

3.Album : The album name is displayed.

4.Time :The time information is displayed.

4 Press [MENU].

The settings are saved.

•Press the [TEXT] during normal playback to view selected file information.

•Press the [TEXT] again to view the track title. If “track title” was the selected file information option, then the artist name will be displayed.

•Each time the [TEXT] is pressed, the displayed information changes in the following order:

Track Title Artist Name

Album Name

NOTE

This setting can be made when “iPod Ctrl” is set to “Remote”.

nniPod Ctrl (Operating an iPod with its own controls)

You can specify whether operation of an iPod is performed with its own controls or from this unit.

1 Select “iPod Setup =>” using [8] and [9], and press [ENTER].

2 Select “iPod Ctrl =>” using [8] and [9], and press [ENTER].

3 Select the device that you want to control using [8] and [9], and press [ENTER].

GSelectable itemsH

1.Direct : Control using the iPod.

2.Remote : Control using this unit and the remote control.

4 Press [MENU].

The device control settings are saved.

NOTE

With the “1 Direct” setting, you can use the Play, Pause, Next, Previous, and Stop commands from the remote control.

When a 1G Nano or 5G iPod is connected with the “1 Direct” setting, the setting will be automatically changed to “2 Remote” as these models do not support this function.

ENGLISH

Performing menu settings

nnResume (Playing tracks from where they were previously stopped)

1 Select “iPod Setup =>” using [8] and [9], and press [ENTER].

2 Select “Resume =>” using [8] and [9], and press [ENTER].

3 Select On or Off for the resume playback settings using [8] and [9], and press [ENTER].

GSelectable itemsH

1.Off : Resume playback is not set.

2.On : Resume playback is set.

4 Press [MENU].

Saves the resume playback settings.

NOTE

Playback will be resumed from the beginning of the current file.

Auto STB (Auto standby mode)

With Auto Standby On, you can automatically set this unit to standby mode after the unit is in stop mode continuously for about 30 minutes (no operation).

1 Select “Auto STB =>” using [8] and [9], and press [ENTER].

2 Select On or Off for the auto standby function using [8] and [9], and press [ENTER].

GSelectable itemsH

On : Enable Auto Standby mode.

Off : Disable Auto Standby mode.

3 Press [MENU].

Saves the auto standby function settings.

NOTE

When the Input Source of this unit is set to “PC”, the Auto STB function may not work properly depending on the applications of your PC.

Getting started Basic connections Basic operation Advanced connections Advanced operations Explanation of terms Troubleshooting Specifications Index

22