Husqvarna PZ29D BF, PZ6029D manual Rollover Protection System Rops, Spark Arrestors

Page 17

SAFETY

Rollover Protection System (ROPS)

The ROPS increases the basic weight of the unit by 73 lbs/33 kg.

Do not use ROPS as a lifting, attaching or anchoring point.

Do not use ROPS for wrecking or towing.

Do not exceed Max GVW: 2822 lbs/1283 kg.

Read machine’s operator manual before use.

Securely fasten the seat belt if the unit has a ROPS.

Where possible, avoid operating the unit near ditches, embankments and holes.

Reduce speed when turning, crossing slopes and on rough, slick or muddy surfaces.

Stay off slopes too steep for safe operation.

Watch where you are going, especially at row ends, on roads and around trees.

Do not permit others to ride.

Operate the mower smoothly - no jerky turns, starts or stops.

When mower is stopped, set brakes securely and use park brake.

If any part of ROPS is damaged, the entire ROPS must be replaced.

Check all bolts including seat belt for correct torque before each use.

Check ROPS structure for damage before each use.

ROPS bar is NOT intended for use in sub zero temperatures.

WARNING!

The rollover protection system's capabilities may be impaired by damage if the mower is overturned or if alteration to the ROPS occurs. If these conditions take place, the total structure MUST be replaced.

WARNING!

This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forested, bush covered or grassy lands unless the engine's system is equipped with a spark arrester meeting applicable local or state laws (if any).

WARNING!

The engine and the exhaust system become very hot during operation.

There is risk for burns if touched.

Allow engine and exhaust system to cool to a safe temperature before refueling.

Spark Arrestors

A spark arrester is standard equipment on the unit and is attached to the engine muffler. Clean the interior screen regularly, depending on usage and conditions.

The engine and the exhaust system become very hot during operation and there is risk for burns if touched.

Allow the exhaust system to cool to a safe temperature before cleaning the screen.

To clean, slide the spark arrestor screen out of the muffler. Clean the carbon from the screen with a soft brush or cloth.

Replace screen and reattach the tail pipe, orienting the tail pipe either horizontally or upwards, away from grassy surfaces.

8065-063

Regularly clean spark arrestor screen

17

Image 17
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Manual Performing any General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Diesel Fuel General Maintenance Risk of sparking Transport Spark Arrestors Rollover Protection System RopsControl Locations ControlsMotion Control Levers Parking Brake Tracking KnobHour Meter Blade SwitchIgnition Switch Ignition switch RUN position Coolant Temperature Battery VoltageControl Module Oil PressureCutting Height Pedals Seat AdjustmentsFuel Shut Off Valve FusesRefueling Steering OperationTraining Before Starting Roll Bar and Safety BeltStarting the Engine Set the throttle Set the engine speed To remove cables, reverse order Weak BatteryJumper Cables Running Operating on Hills Ensure that no one is near mower when engaging blade switchStopping the Engine Mowing Tips Manual Transport Engine and Radiator MaintenanceMaintenance For replacing BatteryFor cleaning Tire Pressures Safety SystemFuel Filter Parking brake adjustment Alignment Drive Lever AdjustmentHeight Adjustment Pump Neutral Adjustment Deck Belt Removal Deck Belt InstallationDeck Belt Replacing Pump Belt Belt Removal/InstallationPump Belt Clutch Belt ReinstallationBelts RemovalCutting Blades Leveling Deck Adjusting the Mower DeckCaster Wheels Removal and InstallationAnti-scalp Rollers Deck Lift SpringHardware CleaningUse protective glasses when cleaning and washing General LubricationLubrication Schedule Cables Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsFluid and Filter Change Hydraulic DriveTransmission Purging Procedures Problem Cause Troubleshooting guideTroubleshooting guide Winter Storage ServiceStorage Wiring Diagram Transmission Technical DataPZ6029D PZ29D BF Engine PZ6029D PZ29D BF Frame DimensionHex Head Cap Screws Torque SpecificationsStandard Hardware Metric Standard HardwareCE requirements USA requirementsDelivery Service Service JournalAfter 10 hours Daily Service Hour Service Service Journal Service Journal At Least Once Each Year Page 115 326227R1 02/25/10

PZ6029D, PZ29D BF specifications

The Husqvarna PZ29D BF and PZ6029D are two powerful members of Husqvarna’s range of commercial-grade zero-turn mowers, designed to meet the needs of both professional landscapers and avid homeowners seeking efficiency and performance. These models stand out with their combination of robust construction, advanced features, and innovative technologies, ensuring they can handle the most demanding mowing tasks with ease.

The PZ29D BF is equipped with a durable 29-horsepower diesel engine, offering exceptional torque and fuel efficiency. This powerhouse, combined with a heavy-duty steel frame, provides stability and longevity, ensuring the unit can withstand rigorous use in varied landscaping environments. The mower's commercial-grade cutting deck, available in multiple widths, allows for precision mowing, while its reinforced edges minimize wear and tear, extending the mower's lifespan.

On the other hand, the PZ6029D features a larger cutting deck, making it ideal for extensive lawns and commercial properties. With a maximum speed of 10 miles per hour, this model allows for rapid mowing, significantly reducing the time spent on the job. Both models are equipped with an adjustable cutting height, enabling the user to customize mowing according to grass type and terrain, promoting healthier lawns.

One of the main technological highlights of these mowers is their hydraulic drive system, which provides unmatched maneuverability. The intuitive controls allow users to quickly navigate tight spaces and obstacles, ensuring a smooth mowing experience. Moreover, both the PZ29D BF and PZ6029D feature a high-back seat with lumbar support, making long hours of mowing more comfortable for the operator.

The innovative air filtration system in both models enhances engine life by ensuring cleaner air intake, leading to improved performance over time. Additionally, the easy-access maintenance points simplify routine upkeep, giving users more time to focus on the task at hand.

Another noteworthy characteristic of these zero-turn mowers is their quiet operation, which is crucial for residential areas and noise-sensitive environments. The construction is not just strong but designed to reduce vibrations, contributing to operator comfort while enhancing overall durability.

In conclusion, the Husqvarna PZ29D BF and PZ6029D are high-performance zero-turn mowers that combine power, efficiency, and ease of use. Their advanced features make them perfect for tackling large mowing tasks while ensuring operator comfort and machine longevity. Whether for a commercial landscape or a spacious backyard, these mowers are built to deliver exceptional results.