CONTROLS
This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Kubota engine developing 29 horse power*.
Transmission from the engine is made via
Control Locations | 4 |
|
hydraulic pumps. Using the left and right steering controls, the flow is regulated and thereby the direction and speed.
3
2
5
6 |
|
7 | 8 |
| |
| 9 |
1. | Motion control levers | 8. | Ignition switch |
2. | Tracking knob | 9. | Hour meter |
3. | Parking brake | 10. | Throttle control |
4. | Fuel tank cap, left | 11. | Blade switch |
5. | Fuses | 12. | Seat adjustment |
6. | Fuel tank cap, right | 13. | Deck release |
7. | Control Module | 14. | Deck lift |
1 |
14
13
12
11 10
*The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed
in the final machine will depend on the operating speed, environmental conditions and other variables.
18