FIGURE 2- Parts List (Items 73 - 105)
DIAG | PART | QTY |
| DIAG | |
LOC. | NO. | REQ | DESCRIPTION (* Denotes Metric Item) | LOC. | |
73 | 020763 | 2 | Washer, Flat, 5/16” SAE | 88 | |
*74 | 197227 | 2 | Capscrew, Hex Hd., M8 x 1.25 x 20mm | 89 | |
75 | 020763 | 2 | Washer, Flat, 5/16" SAE | — | |
*76 | 139738 | 2 | Locknut, Fiber, M8 x 1.25 | — | |
*77 | 197227 | 1 | Capscrew, Hex Hd., M8 x 1.25 x 20mm | 90 | |
78 | 020785 | 1 | Lockwasher, Split, 5/16" | 91 | |
92 | |||||
79 | 020763 | 1 | Washer, Flat, 5/16" SAE | ||
80 | 177063 | 1 | Battery Cable (+) (RED) | 93 | |
542190395 | 1 | Battery Cable (+) (RED)(14KC,18H,20H) | 94 | ||
*81 | 167891 | 1 | Battery Cable, | 95 | |
*82 | 163688 | 2 | Capscrew, Hex Hd., M6 x 1.0 x 16mm | 96 | |
*83 | 139745 | 2 | Locknut, Fiber, M6 x 1.0 | 97 | |
84 | 167735 | 1 | Ignition Switch w/ Key (16KM) | 98 | |
| |||||
163830 | 1 | Ignition Switch w/Key (18H, 20H ) (Notes C & F) | 99 | ||
177920 | 1 | Ignition Switch w/Key (18H, 20H ) (Notes D & F) | 100 | ||
|
|
|
| *101 | |
85 | 139272 | 1 | Wiring Harness (16KM) | *102 | |
177283 | 1 | Wiring Harness (18H, 20H) (See Notes C & G) | *103 | ||
177913 | 1 | Wiring Harness (18H, 20H) (See Note D & G) |
| ||
542190390 | 1 | Wiring | 104 | ||
86 | 139156 | 1 | Stop Switch Assembly (8KM) | 105 | |
— | 139196 | 1 | Stop Switch Assembly (9W) | — | |
— | 177021 | 1 | Stop Switch Assembly (11R, 13H) |
| |
— | 196019 | 1 | Stop Switch Assembly (13.5R) | — | |
— | 177022 | 1 | Stop Switch Assembly (14KC) | ||
— | 177612 | 1 | Stop Switch Assembly (14KCR) | ||
— | 177023 | 1 | Stop Switch Assembly (14KM) | ||
— | 167727 | 1 | Stop Switch Assembly (16BV, 18BV) | ||
|
|
|
| ||
87 | 041317 | 1 | Switch, | ||
|
|
|
|
|
PART
NO.
167959
180418
—
—
020329
020199
167963
167865
020304
167189
167125
020323
020786
167985
139098
167761
173047
172316
177066
177068
177066
167104
166890
020762
139745
QTY REQ
1
4
2
—
2
2
1
1
1
1
2
2
2
1
1
2
2
2
2
2
1
1
1
2
2
2
(REV
DESCRIPTION (* Denotes Metric Item)
Weight Kit (26 lbs.) (Optional) Weight
(1" Not Available Use 2 Of P/N 180418) Capscrew, Hex Hd.,
Locknut, Fiber,
Outer Collar
Tiedown Bracket Kit (Optional)
Eyenut, Saw Tiedown,
Capscrew, Hex Hd.,
Lockwasher, Split, 3/8"
Fitting, 45 Deg Street, 3/8" NPT (9W)
Flap, Splash
Capscrew, Hex Hd., M5 x 0.8 x 20mm
Washer, Flat, M5
Locknut, Fiber, M5 x 0.8
Boot, Rubber – Battery
Boot, Rubber – Cable (14KC Only)
Boot, Rubber – Cable (18H, 20H)
Items Not Shown On Figure 2: Guard, Muffler (Optional: 14KM, 16KM)
Regulator (18H, 20H) (Honda P/N
Locknut, Fiber, M6 x 1.0 **
**Use To Attach Regulator (18H, 20H)
Figure 2 Notes:
A)See Engine Distributor For Item 1B (Element) For The Following Models: 8KM, 9W, 10Y, 11R, 13H, 13.5R, 14KM, 14KCR, 14KC, 16KM, 16BV, 18BV.
C)These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000).
D)These Items (Marked with a D) Effective Spring (Approx. February, 2000).
F)Ignition Switch P/N 163830 must be used with P/N 177283 Wiring Harness. Ignition Switch P/N 177920 must be used with P/N 177913 Wiring Harness. When both items are serviced together it is suggested that the 177920 / 177913 part combination be used because the
G)Wiring Harness P/N 177913 can be identified by the RED stripe near the “engine end” of the harness. P/N 177283 does not have a colored stripe.
H)For Item 45A, P/N 195127 Hinge (1/4” Thick) use P/N 195120 Front Guard Weldment, 18” or P/N 195134 Front Guard Weldment, 20” and M8 attaching hardware (Items 46A, 47A & 48A). For Item 45, P/N 139075 Hinge (1/8” Thick) use P/N 139228 Front Guard Weldment, 18” or P/N 174672 Front Guard Weldment, 20” and M6 attaching hardware (Items 46, 47 & 48).
J)Engine model changed for saws mfg. After 15November2002. P/N 177461 Engine has a 1.00” dia. Crankshaft and requires P/N 167889 pulley (1.00” I.D.). Effective about 15November2002 with saw serial number 383022; units mfg. using P/N 190334 Engine and requires P/N 167942 pulley (1.125” I.D.). P/N’s 177461 & 190334 Engines (w/ Engine Mounted Fuel Tanks) Not Available as of April 2003. P/N 190092 Engine & Fuel Tank Group (See Figure 4) is the only replacement for a complete older style engine.
K)Wiring Harness P/N 542190390 can be identified by a BLUE stripe at one end, & is used only with Engine P/N 190092.
L)PAC
15