Husqvarna YTH1342XP owner manual Mulching Mowing Tips

Page 14

OPERATION

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on level surface with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly dis- engage clutch/brake pedal.

•Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Move motion control lever to neutral (N) position. Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in driving position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

•Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the trac- tor moves approximately five (5) feet return the mo- tion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

•Your transmission is now purged and now ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing per- formance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trim- ming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 10).

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by se- lecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

FIG. 10

MULCHING MOWING TIPS

IMPORTANT: FOR BEST PERFORMANCE, KEEP MOWER HOUSING FREE OF BUILT-UP GRASS AND TRASH. CLEAN AFTER EACH USE.

•The special mulching blade will recut the grass clip- pings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biode- grade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades.

•Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early afternoon. At this time the grass has dried and the newly cut area will not be exposed to the direct sun.

•For best results, adjust the mower cutting height so that the mower cuts off only the top one-third of the grass blades (See Fig. 11). For extremely heavy mulch- ing, reduce your width of cut on each pass and mow slowly.

•Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpendicular to the first cut path.

•Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn.

MAX 1/3

FIG. 11`

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents YTH1342XP General Operation Safety RulesIV. Service II. Slope OperationSafety Rules Table of Contents Blade Unassembled PartsSteering Wheel Seat KeyTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig To SET UP Your Mower for MulchingCheck Deck Levelness To Convert to Bagging or DischargingCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Transport See FigsADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips Mulching Mowing TipsService Dates MaintenanceLubrication Chart General RecommendationsTractor Engine Spark Plugs CleaningMuffler Engine OIL FilterTo Level Mower Housing Service and AdjustmentsTo Install Mower See Fig To Remove Mower See FigBelt Removal Belt InstallationTo Replace Mower Blade Drive Belt See Fig Transaxle Motion Control Lever Neutral ADJUSTMENTSee Fig To Check and Adjust Brake See FigTransmission REMOVAL/REPLACEMENT To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig To Remove Wheel for Repairs See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Carburetor Interlocks and RelaysFuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor Model NO. YTH1342XP YTH1342XPA, Product no 56Electrical KEY Part Description Chassis and Enclosures 532 18 Drive Repair Parts Steering Assembly 532 18 Wheel Steering Seat Assembly 532 18 SeatDecals 532 17Repair Parts EngineMower Lift Mower Deck 532 17 Belt Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement 532 18 44-43 Rev 03.20.03 RH/MH/RH/TR

YTH1342XP specifications

The Husqvarna YTH1342XP is a reliable and efficient riding lawn mower that caters to the needs of homeowners with medium to large-sized lawns. This advanced mower model brings together a robust construction, modern technologies, and user-friendly features, creating an exceptional mowing experience.

At the heart of the YTH1342XP is its powerful 13.5 HP Kohler engine, providing ample power to handle tough grass conditions with ease. The engine is designed for durability and longevity, ensuring that it can withstand regular use season after season. With a hydrostatic transmission, the mower offers smooth and effortless speed adjustments, allowing users to navigate different terrains without experiencing bumps or transitions.

The YTH1342XP features a 42-inch cutting deck that provides effective coverage and makes mowing faster and more efficient. The deck is constructed from high-quality materials, ensuring longevity and resistance to wear and tear. It also has a reinforced cutting deck that enables the mower to tackle taller grass and dense underbrush.

One of the standout characteristics of the YTH1342XP is its cutting height adjustment, which allows users to select from multiple cutting heights based on the specific needs of their lawn. This flexibility ensures a precise and professional-looking finish, which is particularly valuable for lawn enthusiasts.

To enhance user comfort, the mower is equipped with a comfortable high-back seat and ergonomic steering, making long mowing sessions less tiresome. The easy-to-use dashboard includes intuitive controls that make starting the mower and adjusting settings simple.

The YTH1342XP is also compatible with several accessories, including baggers and mulch kits, which can be added to enhance the mower’s functionality. Furthermore, Husqvarna has engineered this model with advanced safety features, including an automatic shut-off function that engages when the driver leaves the seat.

In summary, the Husqvarna YTH1342XP is a robust riding mower that stands out for its powerful performance, versatile cutting options, and thoughtful design elements aimed at improving user experience. Whether maintaining a small yard or managing a larger lawn, this mower offers the efficiency, durability, and comfort that discerning homeowners demand.
Top Page Image Contents