Husqvarna YTH1342XP owner manual Tractor

Page 16

MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

TRAILING

 

MANDREL

EDGE UP

CENTER

ASSEMBLY

 

HOLE

 

FLAT WASHER

 

 

BLADE BOLT

 

STAR

(GRADE 8)*

 

 

 

LOCK WASHER

BLADE

 

 

*A GRADE 8 HEAT TREATED BOLT CAN BE

IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 12

TO SHARPEN BLADE (See Fig. 13)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

 

CENTER HOLE

5/8" BOLT

 

OR PIN

BLADE

BLADE REMOVAL (See Fig. 12)

•Raise mower to highest position to allow access to blades.

•Remove blade bolt, lock washer and flat washer se- curing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Reassemble blade bolt, lock washer and flat washer in exact order as shown.

•Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

FIG. 13

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause

16the battery to “leak” power.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents YTH1342XP Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatBlade KeyAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig To SET UP Your Mower for MulchingTo Convert to Bagging or Discharging Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Mulching Mowing TipsMaintenance Lubrication ChartService Dates General RecommendationsTractor Engine Cleaning MufflerSpark Plugs Engine OIL FilterService and Adjustments To Install Mower See FigTo Level Mower Housing To Remove Mower See FigTo Replace Mower Blade Drive Belt See Fig Belt InstallationBelt Removal To Check and Adjust Brake See Fig Transmission REMOVAL/REPLACEMENTTransaxle Motion Control Lever Neutral ADJUSTMENTSee Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Throttle Control Cable To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor Model NO. YTH1342XP YTH1342XPA, Product no 56Electrical KEY Part Description Chassis and Enclosures 532 18 Drive Repair Parts Steering Assembly 532 18 Wheel Steering Seat Assembly 532 18 SeatDecals 532 17Repair Parts EngineMower Lift Mower Deck 532 17 Belt Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement 532 18 44-43 Rev 03.20.03 RH/MH/RH/TR

YTH1342XP specifications

The Husqvarna YTH1342XP is a reliable and efficient riding lawn mower that caters to the needs of homeowners with medium to large-sized lawns. This advanced mower model brings together a robust construction, modern technologies, and user-friendly features, creating an exceptional mowing experience.

At the heart of the YTH1342XP is its powerful 13.5 HP Kohler engine, providing ample power to handle tough grass conditions with ease. The engine is designed for durability and longevity, ensuring that it can withstand regular use season after season. With a hydrostatic transmission, the mower offers smooth and effortless speed adjustments, allowing users to navigate different terrains without experiencing bumps or transitions.

The YTH1342XP features a 42-inch cutting deck that provides effective coverage and makes mowing faster and more efficient. The deck is constructed from high-quality materials, ensuring longevity and resistance to wear and tear. It also has a reinforced cutting deck that enables the mower to tackle taller grass and dense underbrush.

One of the standout characteristics of the YTH1342XP is its cutting height adjustment, which allows users to select from multiple cutting heights based on the specific needs of their lawn. This flexibility ensures a precise and professional-looking finish, which is particularly valuable for lawn enthusiasts.

To enhance user comfort, the mower is equipped with a comfortable high-back seat and ergonomic steering, making long mowing sessions less tiresome. The easy-to-use dashboard includes intuitive controls that make starting the mower and adjusting settings simple.

The YTH1342XP is also compatible with several accessories, including baggers and mulch kits, which can be added to enhance the mower’s functionality. Furthermore, Husqvarna has engineered this model with advanced safety features, including an automatic shut-off function that engages when the driver leaves the seat.

In summary, the Husqvarna YTH1342XP is a robust riding mower that stands out for its powerful performance, versatile cutting options, and thoughtful design elements aimed at improving user experience. Whether maintaining a small yard or managing a larger lawn, this mower offers the efficiency, durability, and comfort that discerning homeowners demand.
Top Page Image Contents