Husqvarna YTH1342XP owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 24

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

•After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Drain the fuel tank.

•Start the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to “START” position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVERTRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents YTH1342XP Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatBlade KeyAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig To SET UP Your Mower for MulchingTo Convert to Bagging or Discharging Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Mulching Mowing TipsMaintenance Lubrication ChartService Dates General RecommendationsTractor Engine Cleaning MufflerSpark Plugs Engine OIL FilterService and Adjustments To Install Mower See FigTo Level Mower Housing To Remove Mower See FigBelt Installation To Replace Mower Blade Drive Belt See FigBelt Removal To Check and Adjust Brake See Fig Transmission REMOVAL/REPLACEMENTTransaxle Motion Control Lever Neutral ADJUSTMENTSee Fig To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Throttle Control Cable To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor Model NO. YTH1342XP YTH1342XPA, Product no 56Electrical KEY Part Description Chassis and Enclosures 532 18 Drive Repair Parts Steering Assembly 532 18 Wheel Steering Seat Assembly 532 18 SeatDecals 532 17Repair Parts EngineMower Lift Mower Deck 532 17 Belt Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement 532 18 44-43 Rev 03.20.03 RH/MH/RH/TR

YTH1342XP specifications

The Husqvarna YTH1342XP is a reliable and efficient riding lawn mower that caters to the needs of homeowners with medium to large-sized lawns. This advanced mower model brings together a robust construction, modern technologies, and user-friendly features, creating an exceptional mowing experience.

At the heart of the YTH1342XP is its powerful 13.5 HP Kohler engine, providing ample power to handle tough grass conditions with ease. The engine is designed for durability and longevity, ensuring that it can withstand regular use season after season. With a hydrostatic transmission, the mower offers smooth and effortless speed adjustments, allowing users to navigate different terrains without experiencing bumps or transitions.

The YTH1342XP features a 42-inch cutting deck that provides effective coverage and makes mowing faster and more efficient. The deck is constructed from high-quality materials, ensuring longevity and resistance to wear and tear. It also has a reinforced cutting deck that enables the mower to tackle taller grass and dense underbrush.

One of the standout characteristics of the YTH1342XP is its cutting height adjustment, which allows users to select from multiple cutting heights based on the specific needs of their lawn. This flexibility ensures a precise and professional-looking finish, which is particularly valuable for lawn enthusiasts.

To enhance user comfort, the mower is equipped with a comfortable high-back seat and ergonomic steering, making long mowing sessions less tiresome. The easy-to-use dashboard includes intuitive controls that make starting the mower and adjusting settings simple.

The YTH1342XP is also compatible with several accessories, including baggers and mulch kits, which can be added to enhance the mower’s functionality. Furthermore, Husqvarna has engineered this model with advanced safety features, including an automatic shut-off function that engages when the driver leaves the seat.

In summary, the Husqvarna YTH1342XP is a robust riding mower that stands out for its powerful performance, versatile cutting options, and thoughtful design elements aimed at improving user experience. Whether maintaining a small yard or managing a larger lawn, this mower offers the efficiency, durability, and comfort that discerning homeowners demand.
Top Page Image Contents