Husqvarna M53 S, M48 Pro General working instructions, Basic safety rules, Basic mowing technique

Page 8

SAFETY INSTRUCTIONS

General working instructions

WARNING! This section describes basic

!safety precautions for working with the lawn mower. This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsure about how to progress, stop and seek expert advice. Contact your dealer, service agent or an experienced lawn mower user. Avoid all usage which you consider to be beyond your capability

Basic safety rules

Look around you:

-To ensure that people, animals or other things cannot affect your control of the machine.

-To make sure that none of the above might come into contact with the cutting equipment.

Branches, twigs, stones, etc. should be removed from the lawn before you start to mow. Make sure the cutter does not hit foreign objects such as stones, roots or the like.

This can make the cutter dull and bend the engine shaft.

Never lift up the lawn mower or carry it around when the engine is running. If you must lift the lawn mower, first switch off the engine and disconnect the ignition lead from the spark plug.

Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground.

Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground.

The lawn mower should not be used on inclines greater than 30 degrees.

The engine should be switched off when moving over ground that is not to be mowed. For example, gravel paths, stone, shingle, asphalt, etc.

The brake handle must never be permanently anchored in handle when the machine is running.

Follow the instructions above, but do not use a lawn mower in a situation where you cannot call for help in case of an accident.

Basic mowing technique

WARNING! Make sure that your hands and

!feet do not come near the cutting attachment when the engine is running.

General

Mowing slopes can be dangerous. Do not use the lawn mower on very steep slopes.

The lawn mower should not be used on inclines greater than 30 degrees.

On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it.

Branches, twigs, stones, etc. should be removed from the lawn before you start to mow.

Never lift up the lawn mower or carry it around when the engine is running. If you must lift the lawn mower, first switch off the engine and disconnect the ignition lead from the spark plug.

Make sure the cutter does not hit foreign objects such as stones, roots or the like. This can make the cutter dull and bend the engine shaft. A bent axle gives imbalance and heavy vibration, which results in a great risk of the cutter becoming loose.

If any foreign object is hit or if vibrations occur stop the machine immediately. Disconnect the HT lead from the spark plug. Check that the machine is not damaged.

Repair any damage.

Never mow more than 1/3 of the length of the grass. This especially applies during dry periods. Mow first with the cutting height set high. Then check the result and lower to an appropriate height. If the grass is really long, drive slowly and mow twice if necessary.

Never run with the machine when it is running.You should always walk with the lawn mower.

8 – English

Image 8
Contents M48 M53 S EnglishSteps before using a new lawn mower KEY to SymbolsKey to symbols Contents Safety Instructions Machine′s safety equipmentPersonal protection Cutting cover and protective coverVibration damping system MufflerChecking the cutting cover and protective cover Checking the brake triggerIncrease the risk of accidents General safety precautionsCutting equipment Fuel safety StartingTransport and storage Before useBasic safety rules General working instructionsBasic mowing technique GeneralAdjusting the cutting height Cutting heightWhat is WHAT? What is what on the lawn mower? M48What is what on the lawn mower? M53 S Assembly AssemblyFitting the handlebar Dismantling and assembling the cutterFuel Handling FuelPetrol Engine oilStarting and Stopping Starting and stoppingMaintenance MaintenanceCleaning the air filter Air filterSpark plug MufflerCutter Changing the oilM48 M53 S Lubrication of the cutting height adjustmentDrive and gearbox Daily maintenance Weekly maintenanceMonthly maintenance Below you will find some general maintenance instructionsTechnical Data Technical dataEC-declaration of conformity Applies to Europe only1140250-26 ´z+H9¶6P¨ ´z+H9¶6P¨