Husqvarna M53 S, M48 Pro manual Daily maintenance, Weekly maintenance, Monthly maintenance

Page 18

MAINTENANCE

Below you will find some general maintenance instructions.

Daily maintenance

1Check that the engine brake handle works safely.

2Brush leaves, grass and the like off of the lawn mower.

3Check the oil level.

4Clean the air intake on the starter. Check the starter and starter cord.

5Check that nuts and screws are tight.

6Check the cutting attachment. Never use blades that are dull, cracked or damaged.

Weekly maintenance

1Change the engine oil.

2Lubricate the cutting height system

3Clean the air filter. Replace if necessary.

4Clean the spark plug. Check that the electrode gap is 0.7- 0.8 mm.

5Clean the cooling fins on the cylinder.

Monthly maintenance

1Check that drive belt is not damaged and is not visibly defective.

2Clean the gearbox.

3Check the fuel filter and the fuel hose. Replace if necessary.

4Clean the inside of the fuel tank.

5Lubricate the drive control.

´®z+H9"¶6P¨ 18 – English´®z+H9"¶6P¨

Image 18
Contents M48 M53 S EnglishKEY to Symbols Key to symbolsSteps before using a new lawn mower Contents Personal protection Safety InstructionsMachine′s safety equipment Cutting cover and protective coverChecking the cutting cover and protective cover Vibration damping systemMuffler Checking the brake triggerGeneral safety precautions Cutting equipmentIncrease the risk of accidents Transport and storage Fuel safetyStarting Before useBasic mowing technique Basic safety rulesGeneral working instructions GeneralAdjusting the cutting height Cutting heightWhat is WHAT? What is what on the lawn mower? M48What is what on the lawn mower? M53 S Fitting the handlebar AssemblyAssembly Dismantling and assembling the cutterPetrol Fuel HandlingFuel Engine oilStarting and Stopping Starting and stoppingCleaning the air filter MaintenanceMaintenance Air filterCutter Spark plugMuffler Changing the oilLubrication of the cutting height adjustment Drive and gearboxM48 M53 S Monthly maintenance Daily maintenanceWeekly maintenance Below you will find some general maintenance instructionsEC-declaration of conformity Technical DataTechnical data Applies to Europe only1140250-26 ´z+H9¶6P¨ ´z+H9¶6P¨