Husqvarna M48 Pro, M53 S manual Cutting height, Adjusting the cutting height

SAFETY INSTRUCTIONS

Cutting height

Shut down the engine before changing the cutting height.

The cutting height adjustment is spring assisted. The cutting height can be adjusted in five different steps.

Do not set the cutting height too low as there is a risk that the cutters might hit slopes with unevenness.

Adjusting the cutting height

Shut down the engine before changing the cutting height.

Set the cutting height using the cutting height control on the right-hand side of the lawn mower.

On lawn mowers with the type designation M48, proceed as follows:

•To raise the cutting height move the lever to the left and then forward.

•To lower the cutting height move the lever to the left and then backward.

On lawn mowers with the type designation M53 S, proceed as follows:

•To lower the cutting height move the lever to the left and then forward.

•To raise the cutting height move the lever to the left and then backward.

Do not set the cutting height too low as there is a risk that the cutters might hit slopes with unevenness.

English – 9