Husqvarna Explore 's Lawn Mower Features: Fuel Shut Off Valve and Cutting Height Adjustment Lever

Page 22

CONTROLS

Cutting Height Adjuster

The desired cutting height is set with the height pin. The cutting height pedal releases the deck lift to place the deck and the selected height.

For transport, push the lift pedal fully forward until the deck lift latches in the transport (highest) position.

Seat Adjustment Lever

The seat can be adjusted lengthways. When making adjustments, the lever under the front edge of the seat is moved to the left (as seen by the driver in the seat), after which the seat can be moved backward or forward.

Fuel Shut Off Valve

The fuel shut off valve is centered behind the rear of the seat. The valve is off when the handle tab is turned perpendicular to the fuel line.

2

1

8058-223

1.Release pedal

2.Height pin

Cut height selection pedals

8011-441

Lengthways adjustment

8065-010

Fuel shut off valve in the CLOSED position.

22

Image 22

Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxxRemove key before Performing any Safety Instructions SafetyGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Use protective glasses for maintenance workRisk of sparking Transport Spark ArrestorControls Control LocationsMotion Control Levers Blade Switch Service MinderChoke Control Ignition Switch Parking Brake Tracking KnobFuses Seat Adjustment Lever Cutting Height AdjusterFuel Shut Off Valve Fuel Tank Hydro Release LeversTraining OperationSteering Before Starting Starting the Engine Place controls in neutral position Press in and turn the ignition key to the start position Weak Battery To remove cables, reverse orderRunning Operating on Hills Stopping the Engine Mowing Tips Moving Machine By Hand Engine stopped Ignition key removed Parking brake activatedMaintenance Maintenance ScheduleMaintenance Battery Replacing batterySafety System Tire PressuresDeck Belt Deck Belt InstallationDeck Belt Removal Belts Belt InstallationPump Belt Replacing Pump BeltCutting Blades Adjusting the Mower Deck Leveling deckAnti-scalp rollers Caster Wheels CleaningUse protective glasses when cleaning and washing HardwareLubrication Schedule LubricationGeneral Front Wheel Bearings Wheel and Deck ZerksFront Wheel Mount Deck SpindlesEngine oil change Transaxle Transmission Fluid ChangeTransmission Purging Troubleshooting Guide Problem CauseTroubleshooting Guide Storage ServiceWinter Storage Schematic Standard Hardware Technical DataTorque Specifications Metric Standard HardwareBriggs & Stratton Conformity Certificates USA requirementsAction Service JournalDelivery Service Stamp, signAfter 10 hours Date, mtr reading Stamp, signDaily Service Hour Service Service Journal Service Journal At least once each year Page 115 647127 Rev a 2013-10-01