Husqvarna MZ61 warranty Place controls in neutral position

Page 27

OPERATION

5.Move the steering controls outward to the locked (outer) neutral position.

8058-208

Place controls in neutral position

6.Move the throttle to the middle position. If the engine is cold, the choke control should be pulled up.

7. Open the fuel tank valve.

8058-145

Set the throttle and choke

8065-013

Fuel valve in the OPEN position

27

Image 27

Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx Symbols and DecalsRemove key before Performing any Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline Use protective glasses for maintenance work General MaintenanceRisk of sparking Spark Arrestor TransportControl Locations ControlsMotion Control Levers Service Minder Blade SwitchChoke Control Ignition Switch Tracking Knob Parking BrakeFuses Cutting Height Adjuster Seat Adjustment LeverFuel Shut Off Valve Hydro Release Levers Fuel TankOperation TrainingSteering Before Starting Starting the Engine Place controls in neutral position Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryRunning Operating on Hills Stopping the Engine Mowing Tips Engine stopped Ignition key removed Parking brake activated Moving Machine By HandMaintenance Schedule MaintenanceMaintenance Replacing battery BatteryTire Pressures Safety SystemDeck Belt Installation Deck BeltDeck Belt Removal Replacing Pump Belt Belt InstallationPump Belt BeltsCutting Blades Leveling deck Adjusting the Mower DeckAnti-scalp rollers Hardware CleaningUse protective glasses when cleaning and washing Caster WheelsLubrication Lubrication ScheduleGeneral Deck Spindles Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsTransaxle Transmission Fluid Change Engine oil changeTransmission Purging Problem Cause Troubleshooting GuideTroubleshooting Guide Service StorageWinter Storage Schematic Metric Standard Hardware Technical DataTorque Specifications Standard HardwareBriggs & Stratton USA requirements Conformity CertificatesStamp, sign Service JournalDelivery Service ActionDate, mtr reading Stamp, sign After 10 hoursDaily Service Hour Service Service Journal Service Journal At least once each year Page 115 647127 Rev a 2013-10-01