Husqvarna MZ61 warranty Introduction

Page 5

INTRODUCTION

Congratulations

Thank you for purchasing a Husqvarna ride-on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel that is easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance.

This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value.

If you sell your machine, be sure to give the operator’s manual to the new owner.

The final chapter of this operator’s manual provides a Service Journal. Ensure that service and repair work are documented. A well-kept service journal reduces service costs for the maintenance and affects the machine’s resale value. Please contact your dealer for more information. Take the operator’s manual along when the machine is taken to your dealer for service.

General

In this operator’s manual, left and right, backward and forward are used in relation to the machine’s normal driving direction.

Continuous dedication to improve our products require that specifications and design are subject to change without notice.

Driving and Transport on Public Roads

Check applicable road traffic regulations before transporting on public roads. If the machine is transported, you must always use approved fastening equipment and ensure that the machine is well anchored. DO NOT operate this machine on public roadways.

Towing

If machine is equipped with a tow hitch, use extreme caution when towing. Never allow children or others in or on the towed equipment. Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop.

Do not tow on sloped ground. The weight of the towed equipment may cause loss of traction and loss of control.

Follow the manufacturer's recommendation for weight limits for towed equipment. Do not tow near ditches, canals, and other hazards.

Operating

This machine is constructed only for mowing grass on lawns and even ground without obstacles such as stones, tree stumps, etc. The machine can also be used for other tasks when equipped with special accessories provided by the manufacturer. Operating instructions for the accessories are provided with delivery. All other types of uses are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

Lawn mowers and all power equipment can be potentially dangerous if used improperly. Safety requires good judgment, careful use in accordance with these instructions and common sense.

The machine must only be operated, maintained, and repaired by persons familiar with the machine’s special characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts to maintain this machine.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

5

Image 5
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx Symbols and DecalsRemove key before Performing any General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline Use protective glasses for maintenance work General MaintenanceRisk of sparking Spark Arrestor TransportControl Locations ControlsMotion Control Levers Choke Control Service MinderBlade Switch Ignition Switch Fuses Tracking KnobParking Brake Fuel Shut Off Valve Cutting Height AdjusterSeat Adjustment Lever Hydro Release Levers Fuel TankSteering OperationTraining Before Starting Starting the Engine Place controls in neutral position Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryRunning Operating on Hills Stopping the Engine Mowing Tips Engine stopped Ignition key removed Parking brake activated Moving Machine By HandMaintenance Schedule MaintenanceMaintenance Replacing battery BatteryTire Pressures Safety SystemDeck Belt Removal Deck Belt InstallationDeck Belt Pump Belt Belt InstallationBelts Replacing Pump BeltCutting Blades Leveling deck Adjusting the Mower DeckAnti-scalp rollers Use protective glasses when cleaning and washing CleaningCaster Wheels HardwareGeneral LubricationLubrication Schedule Front Wheel Mount Wheel and Deck ZerksFront Wheel Bearings Deck SpindlesTransaxle Transmission Fluid Change Engine oil changeTransmission Purging Problem Cause Troubleshooting GuideTroubleshooting Guide Winter Storage ServiceStorage Schematic Torque Specifications Technical DataStandard Hardware Metric Standard HardwareBriggs & Stratton USA requirements Conformity CertificatesDelivery Service Service JournalAction Stamp, signDate, mtr reading Stamp, sign After 10 hoursDaily Service Hour Service Service Journal Service Journal At least once each year Page 115 647127 Rev a 2013-10-01