Husqvarna 318, 320 AWD manual Presentation

Page 12

PRESENTATION

Presentation

Congratulations on your choice of an excellent quality product that will give you great pleasure for many years. This operator’s manual describes Rider 318 and Rider 320 AWD.

Rider 320 AWD is equipped with all wheel drive.

The power transmission from the engine is handled by a hydrostatic transmission, which allows variable variation of the speed by using the pedals.

One pedal for driving forward and one for reverse.

Throttle control/choke control

The throttle control regulates the engine speed, and thereby also the rotation speed of the blades.

The control is also used to activate the choke. When the choke is engaged a richer fuel and air mixture is fed to the engine, which facilitates starting in the cold.

Speed limiter

The speed of the machine is steplessly regulated with two pedals. Pedal (1) is used to drive forwards, and pedal (2) to drive backwards.

1

2

WARNING! Make sure that branches do not

!obstruct the pedals when mowing under bushes. Otherwise there is a risk you may lose control.

Parking brake

The parking brake is applied as follows:

2

1

1Press down the parking brake pedal (1).

2Press in the lock button (2) on the steering column.

3Release the parking brake pedal while keeping the button pressed in.

The parking brake lock disengages automatically when the brake pedal is pressed.

Cutting unit

Rider 318 and Rider 320 AWD can be equipped with three different cutting units.

•Combi 94

•Combi 103

•Combi 112

The Combi-unit, equipped with a BioClip-plug, finely chops the cuttings to fertiliser. Without the BioClip-plug the unit works in the same way as a rear ejection unit.

Lifting lever for the cutting unit

The lift lever is used to set the cutting unit in transport or mowing position.

If the lever is pulled backwards the unit is raised and the blades automatically stop rotating (transport position).

If the lock button is pressed in and the lever is moved forwards the unit will be lowered and the blades will automatically start to rotate (mowing position).

The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.

Cutting height adjustment lever

The cutting height can be adjusted to 10 different positions with the cutting height lever.

Combi-unit 40-90 mm (1 9/16” - 3 9/16”)

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Rider 318 Rider 320 AWD Contents Service journal Pre-delivery serviceAfter the first 8 hours Introduction KEY to Symbols SymbolsStarting instructions What is WHAT? Location of the controlsSafety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport Presentation Seat FuelingRelease lever Release lever RiderStarting the engine with a weak battery DrivingBefore starting Start the engineConnecting the jump leads Driving the RiderRemove the cables in the reverse order Cutting tips Stop the engineOther objects which can be thrown out by the blades Maintenance Maintenance scheduleCleaning Checking and adjusting the steering wiresRemoving of the machine hoods Adjusting the parking brake Rider Adjusting the parking brake Rider 320 AWDChecking and adjusting of throttle wire Can result in reduced braking abilityReplacement of fuel filter Replacing the air filterChecking the fuel pump’s air filter Cool before starting to replace the air filterCheck the safety system Ignition systemMain fuse Checking the tyre pressureWhen the engine is running. Mind your fingers Checking the engine’s cooling air intakeFitting the cutting head Trapping your handRemoving the cutting unit Adjusting the parallelism of the cutting unit Checking the cutting unit’s parallelismReplacing the cutting unit belts Service position for the cutting unit Placing in the service positionRestoring from service position Checking the bladesRemoving the BioClip plug Combi 103, CombiLubrication Checking the engine’s oil levelChanging the oil filter Replacing the engine oilLubricating the belt adjuster Checking the transmission oil levelGeneral lubrication Troubleshooting schedule Service StorageWinter storage GuardTechnical Data Cutting unit Combi EC-declaration of conformity Applies to Europe only Page Page 1154548-26 ´z+VVr¶6¨ ´z+VVr¶6¨ Original instructions
Related manuals
Manual 24 pages 55.64 Kb

320 AWD, 318 specifications

The Husqvarna 318 and 315 are two remarkable models from Husqvarna, a brand renowned for its quality outdoor power equipment. These compact ride-on lawn mowers are designed to provide optimal performance, maneuverability, and versatility, making them ideal for both residential and commercial use.

One of the key features of the Husqvarna 318 and 315 is their efficient cutting system. Equipped with a high-performance cutting deck, these mowers deliver superior grass-cutting capabilities. The cutting height can be easily adjusted, allowing users to achieve the desired finish with precision. Additionally, the 18-inch cutting width is perfect for navigating tight spaces and corners, making these models suitable for intricate landscaping tasks.

Both models boast an innovative articulated steering system, which enhances their maneuverability. This feature allows the mower to pivot through tight turns, significantly reducing the risk of damage to flower beds and other landscaping features. The Husqvarna 318 and 315 also come with a compact design, making them easy to transport and store.

Equipped with powerful engines, the 318 and 315 provide dependable performance, ensuring that users can tackle even the most challenging lawn care tasks with ease. The engines are designed for fuel efficiency, allowing for longer run times and reduced emissions, aligning with contemporary environmental standards.

The ergonomic seat and intuitive controls provide comfort and convenience, ensuring that users can enjoy extended mowing sessions without discomfort. The dashboard features easy-to-read gauges and controls, making it simple for users to monitor performance and adjust settings on-the-go.

Husqvarna has incorporated cutting-edge technology into these models, including the Bluetooth-enabled connectivity feature. This allows users to track performance data and maintenance schedules directly from their mobile devices, promoting timely upkeep and efficiency.

In conclusion, the Husqvarna 318 and 315 ride-on lawn mowers are versatile and efficient choices for any lawn care enthusiast. With their high-performance cutting systems, innovative steering technology, and user-friendly design, these models are built to enhance the mowing experience. Whether for residential gardens or commercial properties, the Husqvarna 318 and 315 deliver outstanding results, setting a new standard in ride-on mower technology.
Top Page Image Contents