Introduction

Dear Customer,

Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a patented articulated steering. Riders are designed for maximum efﬁciency even in small or conﬁned areas. The closely grouped controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine.

This operator’s manual is a valuable document. By following its instructions (on operation, service, maintenance, etc.) you will signiﬁcantly extend the life of the machine and even its second-hand value.

When you sell your Rider, make sure you pass on the operator’s manual to the new owner.

The last chapter in the operator’s manual consists of a Service Journal. Make sure that all service work and repairs are recorded. A well- documented service history reduces the costs of seasonal maintenance and inﬂuences the second-hand value of the machine. Bring the operator’s manual with the Rider when bringing it to a workshop for service procedures.

Driving and transport on public roads

Check the relevant road trafﬁc regulations before driving the machine on a public road. If transporting the machine on another vehicle always use approved securing devices and make sure that the machine is securely held.

Towing

When your machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a low speed, otherwise there is a risk of damaging the transmission.

The power transmission must be disengaged when towing, see the instructions under the heading Clutch control.

Use

This ride-on mower is designed to mow grass on open and level ground surfaces. In addition, there is a number of accessories recommended by the manufacturer that broadens the application area. Please contact your dealer for more information about which accessories are available. The machine may only be used with the equipment recommended by the manufacturer. All other types of use are incorrect. Compliance with and strict adherence to the conditions of operation, service and repair as speciﬁed by the manufacturer also constitute essential elements of the intended use.

IMPORTANT INFORMATION The transmission guarantee is only valid if the synchronisation of the front and rear wheels has been checked and adjusted in compliance with the service schedule. The system will be damaged if synchronisation is not carried out.

This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and who are acquainted with the relevant safety procedures.

Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road trafﬁc regulations must be observed at all times.

Any arbitrary modiﬁcations carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury.

Good service

Husqvarna products are sold all over the world and ensures that you, the customer, get the best support and service. For example, before this machine was delivered it was inspected and adjusted by your dealer. See the certiﬁcate in the Service Journal in this manual.

When you need spare parts or advice on service issues, warranty terms, etc., contact:

This Operator’s Manual belongs to machine with serial number:

Engine

Transmission

On the machine's rating plate you will ﬁnd the following information:

•The machines type designation.

•The manufacturer’s type number.

•The machine’s serial number.

State the type designation and serial number when ordering spare parts.

4 – English

320 AWD, 318 specifications

The Husqvarna 318 and 315 are two remarkable models from Husqvarna, a brand renowned for its quality outdoor power equipment. These compact ride-on lawn mowers are designed to provide optimal performance, maneuverability, and versatility, making them ideal for both residential and commercial use.

One of the key features of the Husqvarna 318 and 315 is their efficient cutting system. Equipped with a high-performance cutting deck, these mowers deliver superior grass-cutting capabilities. The cutting height can be easily adjusted, allowing users to achieve the desired finish with precision. Additionally, the 18-inch cutting width is perfect for navigating tight spaces and corners, making these models suitable for intricate landscaping tasks.

Both models boast an innovative articulated steering system, which enhances their maneuverability. This feature allows the mower to pivot through tight turns, significantly reducing the risk of damage to flower beds and other landscaping features. The Husqvarna 318 and 315 also come with a compact design, making them easy to transport and store.

Equipped with powerful engines, the 318 and 315 provide dependable performance, ensuring that users can tackle even the most challenging lawn care tasks with ease. The engines are designed for fuel efficiency, allowing for longer run times and reduced emissions, aligning with contemporary environmental standards.

The ergonomic seat and intuitive controls provide comfort and convenience, ensuring that users can enjoy extended mowing sessions without discomfort. The dashboard features easy-to-read gauges and controls, making it simple for users to monitor performance and adjust settings on-the-go.

Husqvarna has incorporated cutting-edge technology into these models, including the Bluetooth-enabled connectivity feature. This allows users to track performance data and maintenance schedules directly from their mobile devices, promoting timely upkeep and efficiency.

In conclusion, the Husqvarna 318 and 315 ride-on lawn mowers are versatile and efficient choices for any lawn care enthusiast. With their high-performance cutting systems, innovative steering technology, and user-friendly design, these models are built to enhance the mowing experience. Whether for residential gardens or commercial properties, the Husqvarna 318 and 315 deliver outstanding results, setting a new standard in ride-on mower technology.