Husqvarna 320 AWD, 318 Service position for the cutting unit, Placing in the service position

Page 25

Maintenance

7Remove the screws on the cutting cover. Lift the unit frame and remove the cutting unit cover.

8Loosen the spring that tensions the V-belt and pry off the belt.

9 Simply reverse the procedure to fit the new belt.

Service position for the cutting unit

The cutting head can be placed in the service position to provide easy access for cleaning, repairs and servicing. In the service position the cutting unit is raised and locked in the vertical position.

Placing in the service position

1Position the machine on flat ground.

2Apply the parking brake.

3Set the cutting height control in the lowest position and lift up the cutting unit.

4 Release the clip on the front hood and lift off the fender.

WARNING! Wear protective glasses when

!dismantling the cutting unit. The spring which tensions up the belt may break and cause personal injury.

5 Disengage the spring for the drive belt tensioning wheel.

6 Loosen on the cutting height stay and place in the holder.

!

WARNING! Observe caution to avoid

trapping your hand.

 

7 Remove the drive belt and place it in the belt holder.

8Grip the front edge of the unit and pull forwards until it stops.

9Lift the unit until it stops and a clicking sound is heard. The unit locks automatically in the vertical position.

English – 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Rider 318 Rider 320 AWD Contents Pre-delivery service Service journalAfter the first 8 hours Introduction Symbols KEY to SymbolsStarting instructions Location of the controls What is WHAT?Safety instructions Safety InstructionsInsure your Rider General useThis is what you do Driving on slopesChildren MaintenanceTransport Presentation Fueling SeatRelease lever Release lever RiderDriving Starting the engine with a weak batteryBefore starting Start the engineDriving the Rider Connecting the jump leadsRemove the cables in the reverse order Stop the engine Cutting tipsOther objects which can be thrown out by the blades Maintenance schedule MaintenanceChecking and adjusting the steering wires CleaningRemoving of the machine hoods Adjusting the parking brake Rider 320 AWD Adjusting the parking brake RiderChecking and adjusting of throttle wire Can result in reduced braking abilityReplacing the air filter Replacement of fuel filterChecking the fuel pump’s air filter Cool before starting to replace the air filterIgnition system Check the safety systemMain fuse Checking the tyre pressureChecking the engine’s cooling air intake When the engine is running. Mind your fingersFitting the cutting head Trapping your handRemoving the cutting unit Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Placing in the service position Service position for the cutting unitChecking the blades Restoring from service positionRemoving the BioClip plug Combi 103, CombiChecking the engine’s oil level LubricationChanging the oil filter Replacing the engine oilChecking the transmission oil level Lubricating the belt adjusterGeneral lubrication Troubleshooting schedule Storage ServiceWinter storage GuardTechnical Data Cutting unit Combi EC-declaration of conformity Applies to Europe only Page Page Original instructions 1154548-26 ´z+VVr¶6¨ ´z+VVr¶6¨
Related manuals
Manual 24 pages 55.64 Kb

320 AWD, 318 specifications

The Husqvarna 318 and 315 are two remarkable models from Husqvarna, a brand renowned for its quality outdoor power equipment. These compact ride-on lawn mowers are designed to provide optimal performance, maneuverability, and versatility, making them ideal for both residential and commercial use.

One of the key features of the Husqvarna 318 and 315 is their efficient cutting system. Equipped with a high-performance cutting deck, these mowers deliver superior grass-cutting capabilities. The cutting height can be easily adjusted, allowing users to achieve the desired finish with precision. Additionally, the 18-inch cutting width is perfect for navigating tight spaces and corners, making these models suitable for intricate landscaping tasks.

Both models boast an innovative articulated steering system, which enhances their maneuverability. This feature allows the mower to pivot through tight turns, significantly reducing the risk of damage to flower beds and other landscaping features. The Husqvarna 318 and 315 also come with a compact design, making them easy to transport and store.

Equipped with powerful engines, the 318 and 315 provide dependable performance, ensuring that users can tackle even the most challenging lawn care tasks with ease. The engines are designed for fuel efficiency, allowing for longer run times and reduced emissions, aligning with contemporary environmental standards.

The ergonomic seat and intuitive controls provide comfort and convenience, ensuring that users can enjoy extended mowing sessions without discomfort. The dashboard features easy-to-read gauges and controls, making it simple for users to monitor performance and adjust settings on-the-go.

Husqvarna has incorporated cutting-edge technology into these models, including the Bluetooth-enabled connectivity feature. This allows users to track performance data and maintenance schedules directly from their mobile devices, promoting timely upkeep and efficiency.

In conclusion, the Husqvarna 318 and 315 ride-on lawn mowers are versatile and efficient choices for any lawn care enthusiast. With their high-performance cutting systems, innovative steering technology, and user-friendly design, these models are built to enhance the mowing experience. Whether for residential gardens or commercial properties, the Husqvarna 318 and 315 deliver outstanding results, setting a new standard in ride-on mower technology.
Top Page Image Contents