Husqvarna 320 AWD, 318 manual Technical Data

Page 31

TECHNICAL DATA

Dimensions

Length without cutting unit, mm/ft Width without cutting unit, mm/ft Height, mm/ft

Operating weight with cutting deck, kg/lb Wheel base, mm/ft

Track width, front, mm/ft

Track width, rear, mm/ft

Tyre dimensions

Air pressure, rear - front, kPa / bar / PSI Max. gradient

Engine

Brand / Model

Nominal engine output, kW (see note 1) Displacement, cm3/cu.in

Max.motor speed, r/min

Fuel, minimum octane grade lead-free Tank volume, litres/USqt

Oil

Oil volume incl. filter

Oil volume excl. filter, litres/USqt Starting

Electrical system

Rider 318

Rider 320 AWD

2020/6,61

2020/6,61

890/2,92

890/2,92

1150/3,77

1150/3,77

278-283-286 / 613-624-631

297-302-305 / 655-666-672

887/2,91

887/2,91

712/2,34

712/2,34

627/2,06

627/2,06

16 x 6,50 x 8

16 x 6,50 x 8

60 (0,6/8,5)

60 (0,6/8,5)

10°

10°

Briggs & stratton / 31L7

Briggs & Stratton / 31Q6

9,6

9,6

500

500

2900 ± 100

2900 ± 100

85

85

12/13

12/13

Class SF, SG, SH or SJ SAE40, SAE30, Class SF, SG, SH or SJ SAE40, SAE30, SAE10W-30, SAE10W-40 or SAE5W-20 SAE10W-30, SAE10W-40 or SAE5W-20

1,6/1,7

1,6/1,7

1,4/1,5

1,4/1,5

Electric start 12V

Electric start 12V

Type

12 V, negative earthed

12 V, negative earthed

Battery

12 V, 24 Ah

12 V, 24 Ah

Spark plug

EMS PLATINUM

EMS PLATINUM

Electrode gap, mm/inch

0,75/0,030

0,75/0,030

Noise emissions and cutting width

 

 

(see note 2)

 

 

Sound power level, measured dB(A)

98

98

Sound power level, guaranteed dB(A)

99

99

Cutting width, mm

94-103-112/37-41-44

94-103-112/37-41-44

Sound levels

 

 

(see note 3)

 

 

Sound pressure level at the operators ear, dB(A)

83

83

Vibration levels

 

 

(see note 4)

 

 

Vibration level on the steering wheel, m/s2

2,5

2,5

Vibration level in the seat, m/s2

0,7

0,7

Transmission

 

 

Brand

Tuff Torq K46

K 574 KTM 10L

Oil, class SF-CC

SAE 10W/40

SAE 10W/50 Synthetic

Cutting unit

 

 

Type

Combi 94

Combi 94

 

Combi 103

Combi 103

 

Combi 112

Combi 112

Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.

Note 2: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A).

Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s2 (steering wheel) and 0.8 m/s2 (seat).

English – 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Rider 318 Rider 320 AWD Contents Pre-delivery service Service journalAfter the first 8 hours Introduction Symbols KEY to SymbolsStarting instructions Location of the controls What is WHAT?General use Safety InstructionsSafety instructions Insure your RiderThis is what you do Driving on slopesChildren MaintenanceTransport Presentation Release lever Rider SeatFueling Release leverStart the engine Starting the engine with a weak batteryDriving Before startingDriving the Rider Connecting the jump leadsRemove the cables in the reverse order Stop the engine Cutting tipsOther objects which can be thrown out by the blades Maintenance schedule MaintenanceChecking and adjusting the steering wires CleaningRemoving of the machine hoods Can result in reduced braking ability Adjusting the parking brake RiderAdjusting the parking brake Rider 320 AWD Checking and adjusting of throttle wireCool before starting to replace the air filter Replacement of fuel filterReplacing the air filter Checking the fuel pump’s air filterChecking the tyre pressure Check the safety systemIgnition system Main fuseTrapping your hand When the engine is running. Mind your fingersChecking the engine’s cooling air intake Fitting the cutting headRemoving the cutting unit Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Placing in the service position Service position for the cutting unitCombi 103, Combi Restoring from service positionChecking the blades Removing the BioClip plugReplacing the engine oil LubricationChecking the engine’s oil level Changing the oil filterChecking the transmission oil level Lubricating the belt adjusterGeneral lubrication Troubleshooting schedule Guard ServiceStorage Winter storageTechnical Data Cutting unit Combi EC-declaration of conformity Applies to Europe only Page Page Original instructions 1154548-26 ´z+VVr¶6¨ ´z+VVr¶6¨
Related manuals
Manual 24 pages 55.64 Kb

320 AWD, 318 specifications

The Husqvarna 318 and 315 are two remarkable models from Husqvarna, a brand renowned for its quality outdoor power equipment. These compact ride-on lawn mowers are designed to provide optimal performance, maneuverability, and versatility, making them ideal for both residential and commercial use.

One of the key features of the Husqvarna 318 and 315 is their efficient cutting system. Equipped with a high-performance cutting deck, these mowers deliver superior grass-cutting capabilities. The cutting height can be easily adjusted, allowing users to achieve the desired finish with precision. Additionally, the 18-inch cutting width is perfect for navigating tight spaces and corners, making these models suitable for intricate landscaping tasks.

Both models boast an innovative articulated steering system, which enhances their maneuverability. This feature allows the mower to pivot through tight turns, significantly reducing the risk of damage to flower beds and other landscaping features. The Husqvarna 318 and 315 also come with a compact design, making them easy to transport and store.

Equipped with powerful engines, the 318 and 315 provide dependable performance, ensuring that users can tackle even the most challenging lawn care tasks with ease. The engines are designed for fuel efficiency, allowing for longer run times and reduced emissions, aligning with contemporary environmental standards.

The ergonomic seat and intuitive controls provide comfort and convenience, ensuring that users can enjoy extended mowing sessions without discomfort. The dashboard features easy-to-read gauges and controls, making it simple for users to monitor performance and adjust settings on-the-go.

Husqvarna has incorporated cutting-edge technology into these models, including the Bluetooth-enabled connectivity feature. This allows users to track performance data and maintenance schedules directly from their mobile devices, promoting timely upkeep and efficiency.

In conclusion, the Husqvarna 318 and 315 ride-on lawn mowers are versatile and efficient choices for any lawn care enthusiast. With their high-performance cutting systems, innovative steering technology, and user-friendly design, these models are built to enhance the mowing experience. Whether for residential gardens or commercial properties, the Husqvarna 318 and 315 deliver outstanding results, setting a new standard in ride-on mower technology.
Top Page Image Contents