Husqvarna 2348 LS To Operate Mower See Fig, Reverse Operation System ROS, To Operate on Hills

Page 11

OPERATION

TO OPERATE MOWER (See Fig. 9)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitat- ing or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflec- tor shield (S) in place.

S

FIG. 9

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

 

USING THE REVERSE OPERATION SYSTEM -

 

Only use if you are certain no children or other bystanders

 

will enter the mowing area.

 

• Depress brake pedal all the way down.

 

• With engine running, turn ignition key counterclockwise

 

to ROS "ON" position.

 

• Look down and behind before and while backing.

 

• Slowly depress reverse drive pedal to start move-

 

ment.

 

• When use of the ROS is no longer needed, turn the

11

ignition key clockwise to engine "ON" position.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowly depress appropriate drive pedal to slowest setting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 3 and 10)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

Transmission Engaged

Transmission Disengaged

FIG. 10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 2348 LS General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor To USE Throttle Control D See HOW to USE Your TractorTo SET Parking BRAKESee a Stopping See bTo Move Forward and Backward See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig System CharacteristicsTo Operate on Hills Using the Reverse Operation SystemTo Operate Mower See Fig Reverse Operation System ROSADD Gasoline Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelPurge Transmission Mowing TipsLubrication Chart MaintenanceBlade Care TractorBrake Operation TiresEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs First Install ANTI-SWAY BAR S Engage belt tension rod K on locking bracket L To Level Mower Mower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Blade Drive Belt Belt Removal Belt InstallationTo Replace Motion Drive Belt See Fig To Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigTo Check Brake Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Points Engine dies when SCH12 SchematicElectrical KEY Part Description Chassis Tractor - Model Number 2348LS 96043004400, Product no 43 197 196 Drive532 40 53-84 Transaxle, Tufftorq K46 171 872 11 211 6962 8179 Spark Arrester KITEngine Engine Power Rating Information Steering Assembly 532 41 Wheel, Steering 532 19 532 40 Seat Seat AssemblyWheels and Tires DecalsMower Deck 532 41 87-00 Deck Weldment Mower Mower Lift Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Service Notes Service Notes 532 41 84-82 12.01.07 TH

2348 LS specifications

The Husqvarna 2348 LS is a powerful and versatile riding lawn mower designed to meet the needs of homeowners looking for a reliable machine for their lawn care routine. Known for its robust features and ease of use, it combines functionality and comfort, making it an excellent choice for residential use.

One of the standout features of the Husqvarna 2348 LS is its powerful 24 HP Briggs & Stratton engine, which provides the necessary power to tackle tough mowing tasks efficiently. This engine is designed for optimal performance and reliability, ensuring that users can mow their lawns with confidence. The automatic transmission allows for smooth acceleration and gear shifting without the need for manual intervention, making it user-friendly for individuals of all skill levels.

The cutting deck is another critical element of the 2348 LS model. With a 48-inch cutting width, it provides an impressive mowing area that reduces the time spent mowing. The cutting height can be easily adjusted, enabling users to customize the height according to their lawn's needs. This flexibility ensures that the grass is cut evenly and maintains a healthy appearance.

The Husqvarna 2348 LS is equipped with advanced features, such as the clearcut deck design, which enhances the mowing efficiency and gives a precise, clean cut. Additionally, the deck is made from durable materials that are resistant to wear and tear, ensuring a long lifespan for the mower.

Comfort is a significant consideration in the design of the 2348 LS. The ergonomic steering wheel and high back seat provide a comfortable riding experience, allowing the user to mow for extended periods without discomfort. Furthermore, the easy-access controls are strategically placed for convenience, making the operation simple and intuitive.

For added safety, the Husqvarna 2348 LS features safety switches that automatically shut off the engine when the operator leaves the seat, preventing accidental starts. The integrated headlights also enhance visibility, allowing users to mow during dawn or dusk.

In summary, the Husqvarna 2348 LS offers a combination of power, efficiency, and comfort, making it an ideal choice for homeowners seeking a reliable riding mower. With its robust engine, versatile cutting capabilities, and user-friendly features, it ensures a well-manicured lawn with minimal effort, cementing its place as a preferred choice among garden enthusiasts.
Top Page Image Contents