Husqvarna 2348 LS manual Mowing Tips, Purge Transmission

Page 13

OPERATION

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is running.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have de- veloped during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on a level surface - that is clear and open - with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the en- gine is running, move throttle control to slow position. Disengage parking brake.

CAUTION: At any time there may be movement of the drive wheels.

•Depress forward drive pedal to full forward position, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five

(5) seconds and release pedal. Repeat this procedure three (3) times.

•Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in engaged position (See “TO TRANSPORT” in this sec- tion of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake.

•Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times.

Your transmission is now purged and now ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trim- ming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 12).

FIG. 11

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 2348 LS Safe Operation Practices for Ride-On Mowers Safety RulesII. Slope Operation General OperationIII. Children ServiceIV. Towing Table of Contents Unassembled Parts AssemblyTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor To SET Parking BRAKESee a HOW to USE Your TractorStopping See b To USE Throttle Control D SeeTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigSystem Characteristics To Move Forward and Backward See FigTo Operate Mower See Fig Using the Reverse Operation SystemReverse Operation System ROS To Operate on HillsBefore Starting the Engine Service REMINDER/HOUR MeterCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsLubrication Chart MaintenanceBrake Operation TractorTires Blade CareEngine Cleaning To Install Mower See Figs Service and AdjustmentsTo Remove Mower See Fig First Install ANTI-SWAY BAR S Engage belt tension rod K on locking bracket L To Level Mower To Replace Mower Blade Drive Belt Mower Drive Belt InstallationMower Drive Belt Removal To Replace Motion Drive Belt See Fig Belt InstallationBelt Removal To Check Brake To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILTroubleshooting Points Engine dies when SCH12 SchematicElectrical KEY Part Description Chassis Tractor - Model Number 2348LS 96043004400, Product no 43 197 196 Drive532 40 53-84 Transaxle, Tufftorq K46 171 872 11 Engine Spark Arrester KIT211 6962 8179 Engine Power Rating Information Steering Assembly 532 41 Wheel, Steering 532 19 532 40 Seat Seat AssemblyWheels and Tires DecalsMower Deck 532 41 87-00 Deck Weldment Mower Mower Lift Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Service Notes Service Notes 532 41 84-82 12.01.07 TH

2348 LS specifications

The Husqvarna 2348 LS is a powerful and versatile riding lawn mower designed to meet the needs of homeowners looking for a reliable machine for their lawn care routine. Known for its robust features and ease of use, it combines functionality and comfort, making it an excellent choice for residential use.

One of the standout features of the Husqvarna 2348 LS is its powerful 24 HP Briggs & Stratton engine, which provides the necessary power to tackle tough mowing tasks efficiently. This engine is designed for optimal performance and reliability, ensuring that users can mow their lawns with confidence. The automatic transmission allows for smooth acceleration and gear shifting without the need for manual intervention, making it user-friendly for individuals of all skill levels.

The cutting deck is another critical element of the 2348 LS model. With a 48-inch cutting width, it provides an impressive mowing area that reduces the time spent mowing. The cutting height can be easily adjusted, enabling users to customize the height according to their lawn's needs. This flexibility ensures that the grass is cut evenly and maintains a healthy appearance.

The Husqvarna 2348 LS is equipped with advanced features, such as the clearcut deck design, which enhances the mowing efficiency and gives a precise, clean cut. Additionally, the deck is made from durable materials that are resistant to wear and tear, ensuring a long lifespan for the mower.

Comfort is a significant consideration in the design of the 2348 LS. The ergonomic steering wheel and high back seat provide a comfortable riding experience, allowing the user to mow for extended periods without discomfort. Furthermore, the easy-access controls are strategically placed for convenience, making the operation simple and intuitive.

For added safety, the Husqvarna 2348 LS features safety switches that automatically shut off the engine when the operator leaves the seat, preventing accidental starts. The integrated headlights also enhance visibility, allowing users to mow during dawn or dusk.

In summary, the Husqvarna 2348 LS offers a combination of power, efficiency, and comfort, making it an ideal choice for homeowners seeking a reliable riding mower. With its robust engine, versatile cutting capabilities, and user-friendly features, it ensures a well-manicured lawn with minimal effort, cementing its place as a preferred choice among garden enthusiasts.
Top Page Image Contents