Husqvarna 2348 LS manual To Level Mower

Page 21

SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 22)

With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

FIG. 22

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 23)

With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

Raise mower to its highest position.

At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

FIG. 23

If adjustment is necessary, see step in Visual Adjust- ment instructions above.

Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 24 and 25) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

Raise mower to highest position.

Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

02548

BB

FIG. 24

With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

Tighten adjust nut

Loosen adjust

B to raise mower

nut B to lower

02950

mower

 

Loosen jam nut A first

FIG. 25

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

21

Image 21
Contents 2348 LS Safe Operation Practices for Ride-On Mowers Safety RulesII. Slope Operation General OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts AssemblyTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor To SET Parking BRAKESee a HOW to USE Your TractorStopping See b To USE Throttle Control D SeeTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigSystem Characteristics To Move Forward and Backward See FigTo Operate Mower See Fig Using the Reverse Operation SystemReverse Operation System ROS To Operate on HillsBefore Starting the Engine Service REMINDER/HOUR MeterCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsLubrication Chart MaintenanceBrake Operation TractorTires Blade CareEngine Cleaning Service and Adjustments To Install Mower See FigsTo Remove Mower See Fig First Install ANTI-SWAY BAR S Engage belt tension rod K on locking bracket L To Level Mower Mower Drive Belt Installation To Replace Mower Blade Drive BeltMower Drive Belt Removal Belt Installation To Replace Motion Drive Belt See FigBelt Removal To Check Brake To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILTroubleshooting Points Engine dies when SCH12 SchematicElectrical KEY Part Description Chassis Tractor - Model Number 2348LS 96043004400, Product no 43 197 196 Drive532 40 53-84 Transaxle, Tufftorq K46 171 872 11 Spark Arrester KIT Engine211 6962 8179 Engine Power Rating Information Steering Assembly 532 41 Wheel, Steering 532 19 532 40 Seat Seat AssemblyWheels and Tires DecalsMower Deck 532 41 87-00 Deck Weldment Mower Mower Lift Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Service Notes Service Notes 532 41 84-82 12.01.07 TH

2348 LS specifications

The Husqvarna 2348 LS is a powerful and versatile riding lawn mower designed to meet the needs of homeowners looking for a reliable machine for their lawn care routine. Known for its robust features and ease of use, it combines functionality and comfort, making it an excellent choice for residential use.

One of the standout features of the Husqvarna 2348 LS is its powerful 24 HP Briggs & Stratton engine, which provides the necessary power to tackle tough mowing tasks efficiently. This engine is designed for optimal performance and reliability, ensuring that users can mow their lawns with confidence. The automatic transmission allows for smooth acceleration and gear shifting without the need for manual intervention, making it user-friendly for individuals of all skill levels.

The cutting deck is another critical element of the 2348 LS model. With a 48-inch cutting width, it provides an impressive mowing area that reduces the time spent mowing. The cutting height can be easily adjusted, enabling users to customize the height according to their lawn's needs. This flexibility ensures that the grass is cut evenly and maintains a healthy appearance.

The Husqvarna 2348 LS is equipped with advanced features, such as the clearcut deck design, which enhances the mowing efficiency and gives a precise, clean cut. Additionally, the deck is made from durable materials that are resistant to wear and tear, ensuring a long lifespan for the mower.

Comfort is a significant consideration in the design of the 2348 LS. The ergonomic steering wheel and high back seat provide a comfortable riding experience, allowing the user to mow for extended periods without discomfort. Furthermore, the easy-access controls are strategically placed for convenience, making the operation simple and intuitive.

For added safety, the Husqvarna 2348 LS features safety switches that automatically shut off the engine when the operator leaves the seat, preventing accidental starts. The integrated headlights also enhance visibility, allowing users to mow during dawn or dusk.

In summary, the Husqvarna 2348 LS offers a combination of power, efficiency, and comfort, making it an ideal choice for homeowners seeking a reliable riding mower. With its robust engine, versatile cutting capabilities, and user-friendly features, it ensures a well-manicured lawn with minimal effort, cementing its place as a preferred choice among garden enthusiasts.