Husqvarna iZ5223TKAA manual Control Arms, Seat Install, Engine Oil, Discharge Chute

Page 16

SETUP AND ADJUSTMENTS

Control Arms

Remove top bolt in control arm and loosen bot- tom bolt, rotate the control levers to the upright position. Align the levers so they are even in the neutral position. Reinstall hardware and tighten. FIG - 1

Seat Install

1.Remove seat assembly from the crate.

2.Remove the four 5/16C nyloc nuts or 5/16C studed knobs from the bottom of the seat. Retain for use later.

3.Align the seat bottom with the holes in the seat frame. Place seat on top of the seat frame and secure with the four nuts or knobs re- moved in step 2.

4.Connect the wire harness from the seat to the frame harness.

Engine Oil

Check engine oil with dip stick. Add if needed per the engine manufactures specifications. See en- gine manual for oil type and filling specifications. FIG - 2

Loosen the discharge chute slightly and lower into position. Chute should be snug but still pivot freely.

Install armrests to seat. Hardware and armrests are in the plastic bag.

Discharge Chute

If discharge chute is not assembled to the cutting deck follow the instructions below.

1.Hook the spring end over the discharge chute and align the I.D. of the spring with the holes in the chute.

2.Align the chute and spring with the tabs on the cutting deck. Rotate the spring end counter- clockwise so it rests on top of the cutting deck.

3.Slide the clevis pin with a 5/16 washer thru the hoes of the chute, deck and spring.

4.Secure clevis pin with 5/16 washer and cotter pin.

5.If assembled properly the chute should be spring loaded in the down position. FIG - 3

Control

Motion

Arm

Control

 

Lever

FIG - 1

“F” Full

Operating Mark

Range

 

FIG - 2

Discharge

5/16 Washer

Chute

 

 

Clevis

 

Pin

1/2 x 3/4

 

Cotter Pin

 

Spring

 

 

FIG - 3

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operators manual Manual no REV. IR 09/08/04Husqvarna. All right reserved Beatrice, NE. Printed U.S.A Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Discharge deck in placeKeep children away from the work area Driving on Slopes Safety Instructions Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesPresentation PresentationRops Assembly Roll Over Protection System Setup and AdjustmentsTires Seat Install Control ArmsEngine Oil Discharge ChuteAdjustments Cutting HeightMower Deck Leveling Throttle Lever TensionPark Brake Adjustment For Models 968999254 Park Brake Adjustment For Models 968999256 968999258Motion Control Linkage Adjustment Setup and Adjustments Operation Operating instructionsBlade Switch Hour Meter Key SwitchChoke Control Throttle ControlMaintenance Hydraulic system Deck beltPump belt LubricationTire pressure Caster WheelsWinter storage 110 Nm 80 ft/lbMaintenance Schedule Trouble Shooting ProblemWiring Diagrams Wiring Diagrams

iZ5223TKAA, iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, iZ6123KAA specifications

Husqvarna, a leading brand in outdoor power equipment, has a notable lineup of zero-turn mowers that combine efficiency, durability, and advanced technology. Among these, the models iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA stand out for their powerful performance and user-friendly features.

Starting with the iZ4821KAA, this zero-turn mower boasts a robust 21-horsepower Kohler engine, ensuring exceptional cutting performance. It features a 48-inch cutting deck, allowing for a wider cutting path, which is ideal for larger lawns. The innovative design of the cutting deck enhances air flow and grass lift, leading to a cleaner cut.

Next, the iZ5223KAA offers a slightly larger 52-inch cutting deck and is equipped with a 23-horsepower engine, allowing for increased mowing speed and efficiency. This model also includes an ergonomic seat and control system, providing operators with maximum comfort during extended mowing sessions.

The iZ5223TKOA model elevates the standard features of the iZ5223KAA with added versatility. It includes a specially designed mulch kit and optional bagging attachments, allowing users to customize their mowing experience based on lawn conditions. The heavy-duty frame and durable wheels of this model enhance stability, making it suitable for various terrains.

The iZ4217TSKAA is another excellent option, featuring a smaller 42-inch cutting deck that is ideal for tighter spaces. Powered by a reliable 17-horsepower engine, this mower is perfect for homeowners with medium-sized lawns. Its compact design ensures maneuverability while delivering a fantastic cut.

For those looking for power combined with maneuverability, the iZ4817TSKAA offers a dynamically balanced performance with a 48-inch cutting deck and 17-horsepower engine. It is designed to navigate around obstacles easily, making it perfect for landscaped gardens.

Finally, the iZ6123KAA represents the higher echelon of Husqvarna’s zero-turn mowers. With a powerful 23-horsepower engine coupled with a 61-inch cutting deck, it’s designed for commercial-grade performance or homeowners with expansive lawns. It features advanced technology for improved fuel efficiency while maintaining powerful cutting performance.

Overall, Husqvarna's IDs such as iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA showcase innovative features that appeal to both residential and commercial users. Their combination of powerful engines, durable construction, and user-centric design ensures a reliable mowing experience, setting a new standard in lawn care technology.
Top Page Image Contents