Husqvarna iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, iZ6123KAA Choke Control

Page 21

OPERATION

Blade Switch

Hour Meter

Blade engagement switch located on the console

The hour meter displays the total operating time

is engaged by pulling up on the switch and pushed

and reminds of service intervals.

down to disengage. FIG - 9.

The meter will indicate “CHG OIL” for engine oil

Choke Control

and “SVC” for general service at preset intervals.

Choke control is located on the console. To choke

The hour meter will reset itself at predetermined

engine pull knob push to release. FIG -9.

times.

Throttle Control

Engine “CHG” will come on after the first ten (10)

Throttle control is located on the console. Used to

hours of operation, and will stay on for one (1)

control engine RPM. FIG - 9. Some models have

hour of operation before it will reset itself. It will

an intergated choke located on the throttle con-

come on every 99 hours thereafter, and stay on

trol. Choke position for these models is maximum

for five (5) hours of operation before resetting.

forward on the throttle control.

Mower “SVC” message will come on every 50

Parking Brake

hours to remind to lubricate the unit, check blades

and fasteners, etc. This message will stay on for

Parking brake is located on the left side of the

two (2) hours of operation before resetting.

machine and directly in front of the fuel tank. Pull

Fuel Shut Off

the lever back to engage the brake and push lever

Fuel shut off valve is located at the right rear of the

forward to release the brake.

Key Switch

seat. The valve has three positions a right tank, left

tank and center is the off position. FIG - 10.

Key switch is located on the console. Used to start

the machine. NOTE: Do not run the starter for more

 

than 5 seconds at a time. If the engine will not start,

Fuel Valve

wait about 10 seconds before trying again. FIG - 9

 

NOTE: Associated choke on some models.

 

Choke

 

Throttle

 

Key Switch

 

Blade

FIG - 10

Engagement

 

Pump Release Valves

 

Pump release valves located at the right front cor-

 

ner of the pumps. Used to release the system so

 

the machine may be moved by hand when not

 

running. Tilt seat forward to gain access to the

Hour Meter

pumps. Use a 5/8” wrench to open valve. NOTE:

 

Only rotate valve 1/4 turn to release system.

FIG - 9

 

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Manual no REV. IR 09/08/04 Operators manualHusqvarna. All right reserved Beatrice, NE. Printed U.S.A Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Discharge deck in placeKeep children away from the work area Do as follows Driving on Slopes Safety InstructionsChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemPresentation PresentationSetup and Adjustments Rops Assembly Roll Over Protection SystemTires Control Arms Seat InstallEngine Oil Discharge ChuteCutting Height AdjustmentsMower Deck Leveling Throttle Lever TensionPark Brake Adjustment For Models 968999256 968999258 Park Brake Adjustment For Models 968999254Motion Control Linkage Adjustment Setup and Adjustments Operating instructions OperationKey Switch Blade Switch Hour MeterChoke Control Throttle ControlMaintenance Deck belt Hydraulic systemLubrication Pump beltTire pressure Caster Wheels110 Nm 80 ft/lb Winter storageMaintenance Schedule Problem Trouble ShootingWiring Diagrams Wiring Diagrams

iZ5223TKAA, iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, iZ6123KAA specifications

Husqvarna, a leading brand in outdoor power equipment, has a notable lineup of zero-turn mowers that combine efficiency, durability, and advanced technology. Among these, the models iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA stand out for their powerful performance and user-friendly features.

Starting with the iZ4821KAA, this zero-turn mower boasts a robust 21-horsepower Kohler engine, ensuring exceptional cutting performance. It features a 48-inch cutting deck, allowing for a wider cutting path, which is ideal for larger lawns. The innovative design of the cutting deck enhances air flow and grass lift, leading to a cleaner cut.

Next, the iZ5223KAA offers a slightly larger 52-inch cutting deck and is equipped with a 23-horsepower engine, allowing for increased mowing speed and efficiency. This model also includes an ergonomic seat and control system, providing operators with maximum comfort during extended mowing sessions.

The iZ5223TKOA model elevates the standard features of the iZ5223KAA with added versatility. It includes a specially designed mulch kit and optional bagging attachments, allowing users to customize their mowing experience based on lawn conditions. The heavy-duty frame and durable wheels of this model enhance stability, making it suitable for various terrains.

The iZ4217TSKAA is another excellent option, featuring a smaller 42-inch cutting deck that is ideal for tighter spaces. Powered by a reliable 17-horsepower engine, this mower is perfect for homeowners with medium-sized lawns. Its compact design ensures maneuverability while delivering a fantastic cut.

For those looking for power combined with maneuverability, the iZ4817TSKAA offers a dynamically balanced performance with a 48-inch cutting deck and 17-horsepower engine. It is designed to navigate around obstacles easily, making it perfect for landscaped gardens.

Finally, the iZ6123KAA represents the higher echelon of Husqvarna’s zero-turn mowers. With a powerful 23-horsepower engine coupled with a 61-inch cutting deck, it’s designed for commercial-grade performance or homeowners with expansive lawns. It features advanced technology for improved fuel efficiency while maintaining powerful cutting performance.

Overall, Husqvarna's IDs such as iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA showcase innovative features that appeal to both residential and commercial users. Their combination of powerful engines, durable construction, and user-centric design ensures a reliable mowing experience, setting a new standard in lawn care technology.
Top Page Image Contents