Husqvarna iZ5223TKAA manual Maintenance

Page 22

MAINTENANCE

Maintenance

WARNING!

No settings or adjustments are to be made unless: Engine is stopped, key has been removed, park brake is on and bat- tery cable removed from battery.

Annual inspection and maintenance from an au- thorized Husqvarna dealer is recommended to keep your machine in the best condition mechani- cally and ensures safe operation.

Engine oil

Should be checked daily before starting the ma- chine. See the engine manufacturers manual for specifications on type of oil, filling instructions and service intervals. FIG - 11

“F” Full

Operating Mark

Range

FIG - 11

Cutter Housings

Grease housings once weekly or every 40 to 50 hours of use. Use a good synthetic grease. Pump grease in until a small amount purges from the popet on the underside of the deck. Check the torque of the pulley bolt (45 ft/lbs) should be main- tained.

Safety interlock system

Check daily and never operate the machine if the system is not functioning properly. The starter should crank only when the operator is in the seat, the parking brake is applied, blade switch off and the motion control levers in the neutral slots. If the machine starts with any of these controls in an operating position, turn the machine off and re- pair the system immediately.

Hardware

Check daily. Inspect the entire machine for loose or missing hardware.

Air filter

See engine manufacturers specifications for cleaning and replacement intervals.

Mower blades

Inspect blades and sharpen or replace as needed. Check blades daily or as needed. Bent, cracked or blades with large notches in them should be replaced. Sharpen to an angle of 22 to 28 degrees. Always check the balance of the blades after sharpening to prevent excessive vibration.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operators manual Manual no REV. IR 09/08/04Husqvarna. All right reserved Beatrice, NE. Printed U.S.A Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsGeneral Use Safety InstructionsSafety Instructions Discharge deck in placeKeep children away from the work area Driving on Slopes Safety Instructions Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesPresentation PresentationRops Assembly Roll Over Protection System Setup and AdjustmentsTires Engine Oil Seat InstallControl Arms Discharge ChuteMower Deck Leveling AdjustmentsCutting Height Throttle Lever TensionPark Brake Adjustment For Models 968999254 Park Brake Adjustment For Models 968999256 968999258Motion Control Linkage Adjustment Setup and Adjustments Operation Operating instructionsChoke Control Blade Switch Hour MeterKey Switch Throttle ControlMaintenance Hydraulic system Deck beltTire pressure Pump beltLubrication Caster WheelsWinter storage 110 Nm 80 ft/lbMaintenance Schedule Trouble Shooting ProblemWiring Diagrams Wiring Diagrams

iZ5223TKAA, iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, iZ6123KAA specifications

Husqvarna, a leading brand in outdoor power equipment, has a notable lineup of zero-turn mowers that combine efficiency, durability, and advanced technology. Among these, the models iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA stand out for their powerful performance and user-friendly features.

Starting with the iZ4821KAA, this zero-turn mower boasts a robust 21-horsepower Kohler engine, ensuring exceptional cutting performance. It features a 48-inch cutting deck, allowing for a wider cutting path, which is ideal for larger lawns. The innovative design of the cutting deck enhances air flow and grass lift, leading to a cleaner cut.

Next, the iZ5223KAA offers a slightly larger 52-inch cutting deck and is equipped with a 23-horsepower engine, allowing for increased mowing speed and efficiency. This model also includes an ergonomic seat and control system, providing operators with maximum comfort during extended mowing sessions.

The iZ5223TKOA model elevates the standard features of the iZ5223KAA with added versatility. It includes a specially designed mulch kit and optional bagging attachments, allowing users to customize their mowing experience based on lawn conditions. The heavy-duty frame and durable wheels of this model enhance stability, making it suitable for various terrains.

The iZ4217TSKAA is another excellent option, featuring a smaller 42-inch cutting deck that is ideal for tighter spaces. Powered by a reliable 17-horsepower engine, this mower is perfect for homeowners with medium-sized lawns. Its compact design ensures maneuverability while delivering a fantastic cut.

For those looking for power combined with maneuverability, the iZ4817TSKAA offers a dynamically balanced performance with a 48-inch cutting deck and 17-horsepower engine. It is designed to navigate around obstacles easily, making it perfect for landscaped gardens.

Finally, the iZ6123KAA represents the higher echelon of Husqvarna’s zero-turn mowers. With a powerful 23-horsepower engine coupled with a 61-inch cutting deck, it’s designed for commercial-grade performance or homeowners with expansive lawns. It features advanced technology for improved fuel efficiency while maintaining powerful cutting performance.

Overall, Husqvarna's IDs such as iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA showcase innovative features that appeal to both residential and commercial users. Their combination of powerful engines, durable construction, and user-centric design ensures a reliable mowing experience, setting a new standard in lawn care technology.
Top Page Image Contents