MAINTENANCE
Winter storage
To prepare the machine for storage. Clean the machine, especialy under the deck.
Inspect the machine for damage and loose hard- ware.
Change the oil.
Drain the fuel system or add stabilizer to fuel. Make sure to run the machine after to circulate stabilizer throughout system.
Remove the plugs and add 1 tablespoon of oil in each cylinder. Install plugs and crank the engine two or three revolutions.
Grease all zerks.
Remove battery and store inside and protect it from freezing temperatures.
Torque Specifications
· | Engine crankshaft bolt | 67 Nm(50 ft/lb) |
· | Deck pulley bolts | 61 Nm (45 ft/lb) |
· | Hydraulic tube nuts | 41 Nm (30 ft/lb) |
· | Wheel motor hub nut | 122 Nm (90 ft/lb) |
· | Lug nuts | 100 Nm (75 ft/lb) |
· | Blade bolt | 122 Nm (90 ft/lb) |
· | Standard ¼” fasteners | 12 Nm (9 ft/lb) |
· | Standard 5/16” fasteners | 25 Nm (18 ft/lb) |
· | Standard 3/8” fasteners | 44 Nm (33 ft/lb) |
·Standard 7/16” fasteners
(seat belt) | 70 Nm (52 ft/lb) |
·Standard ½” fasteners
(roll bar) | 110 Nm (80 ft/lb) |
25