Park Brake Adjustment For Models 968999254

SETUP AND ADJUSTMENTS

Park Brake Adjustment

For Models: 968999256, 968999257,

968999258, 968999259

1.Stop engine and remove key. Release park brake and measure the length of the spring. The distance between the washer on each end of the spring should be 2-7/8". FIG - 5

2.If adjustment is needed, loosen the nut below the spring. Then rotate nut to desired position so the proper distance between the washers is obtained. Check other side for proper ad- justment.

3.Engage the brake lever and measure the dis- tance between the trunnion pin and the collar welded to the brake rod. Distance should be 3/16" to 1/4". FIG - 5

4.If adjustment is needed, loosen the lock nut directly below the yoke. Using a wrench, ro- tate the rod by turning the double nuts using the nuts below the yoke and the nut you just loosened, to obtain the 3/16" to 1/4" distance. Tighten nut against yoke and check other side for proper adjustment.

Park
Brake
Lever
Yoke
		Lock Nut
3/16 to 1/4		Double Nuts
3/16 to 1/4
Gap Under Collar	2-7/8”	Trunnion Pin
		Spring
		Washer
	FIG - 5

Park Brake Adjustment

For Models: 968999254, 968999255

1.Stop engine and remove key, release park brake and check the gap between the rear tire and the brake arm. The gap should be 1/8” to 1/4”.

2.If adjustment is needed, loosen the lock nut next to the yoke. Remove the pin from the front yoke so you can rotate the yoke on the adjust- ment link until the proper gap is achieved.

3.Make sure the brake arm on both sides does not touch the tire when the brake is in the off position. FIG - 6

Front Yoke	Lock Nut	Adjustment Link
Front Yoke	Lock Nut		Yoke
			Brake
	1/8”-1/4”		Arm
	Gap
Park Brake Lever
(in the off position)
Rear Tire
	FIG - 6

Motion Control Linkage Adjustment

This adjustment must be made with the rear wheels rotating. Raise the rear of the machine and block it up so the wheels are free to rotate.

CAUTION: Keep hands, feet and clothing away from rotating tires.

Tilt seat forward and remove the seat rod so the seat may rotate forward onto the frame.

Place a 2x4 board between the foot plate and the center of the seat to engage the seat safety switch.

Loosen the nuts directly behind each ball joint on both rods that connect the pump arm to the mo- tion control assemblies. FIG - 7

Start the engine. The park brake must be engaged and the motion control levers in the neutral slots to start the engine. Run the engine approximately half throttle

Release park brake to allow the wheels to rotate.

iZ5223TKAA, iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, iZ6123KAA specifications

Husqvarna, a leading brand in outdoor power equipment, has a notable lineup of zero-turn mowers that combine efficiency, durability, and advanced technology. Among these, the models iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA stand out for their powerful performance and user-friendly features.

Starting with the iZ4821KAA, this zero-turn mower boasts a robust 21-horsepower Kohler engine, ensuring exceptional cutting performance. It features a 48-inch cutting deck, allowing for a wider cutting path, which is ideal for larger lawns. The innovative design of the cutting deck enhances air flow and grass lift, leading to a cleaner cut.

Next, the iZ5223KAA offers a slightly larger 52-inch cutting deck and is equipped with a 23-horsepower engine, allowing for increased mowing speed and efficiency. This model also includes an ergonomic seat and control system, providing operators with maximum comfort during extended mowing sessions.

The iZ5223TKOA model elevates the standard features of the iZ5223KAA with added versatility. It includes a specially designed mulch kit and optional bagging attachments, allowing users to customize their mowing experience based on lawn conditions. The heavy-duty frame and durable wheels of this model enhance stability, making it suitable for various terrains.

The iZ4217TSKAA is another excellent option, featuring a smaller 42-inch cutting deck that is ideal for tighter spaces. Powered by a reliable 17-horsepower engine, this mower is perfect for homeowners with medium-sized lawns. Its compact design ensures maneuverability while delivering a fantastic cut.

For those looking for power combined with maneuverability, the iZ4817TSKAA offers a dynamically balanced performance with a 48-inch cutting deck and 17-horsepower engine. It is designed to navigate around obstacles easily, making it perfect for landscaped gardens.

Finally, the iZ6123KAA represents the higher echelon of Husqvarna’s zero-turn mowers. With a powerful 23-horsepower engine coupled with a 61-inch cutting deck, it’s designed for commercial-grade performance or homeowners with expansive lawns. It features advanced technology for improved fuel efficiency while maintaining powerful cutting performance.

Overall, Husqvarna's IDs such as iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, and iZ6123KAA showcase innovative features that appeal to both residential and commercial users. Their combination of powerful engines, durable construction, and user-centric design ensures a reliable mowing experience, setting a new standard in lawn care technology.