Husqvarna J 55S L Training, II. Preparation, III. Operation, IV. Maintenance and Storage

Page 3

Safe Operation Practices for Pedestrian-Controlled Rotary Lawnmowers

IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

I.Training

Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.

Never allow children or people unfamiliar with the instructions to use the lawnmower. Local regulations may restrict the age of the operator.

Never mow while people, especially children, or pets are nearby.

Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

II. Preparation

While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.

Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine.

WARNING - Petrol is highly flammable.

-Store fuel in containers specifically designed for this purpose.

-Refuel outdoors only and do not smoke while refu- eling.

-Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot.

-If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spill- age and avoid creating any source of ignition until petrol vapors have dissipated.

-Replace all fuel tanks and container caps se- curely.

Replace faulty silencers.

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

III. Operation

Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.

Mow only in daylight or in good artificial light.

Avoid operating the equipment in wet grass, where feasible.

Always be sure of your footing on slopes.

Walk, never run.

For wheeled rotary machines, mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction on slopes.

Do not mow excessively steep slopes.

Use extreme caution when reversing or pulling the lawnmower towards you.

Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed.

Never operate the lawnmower with defective guards, or without safety devices, for example deflectors and/or grass catchers, in place.

Do not change the engine governor settings or over- speed the engine. Operating the engine at excessive speed may increase the hazard of personal injury.

Disengage all blade and drive clutches before starting the engine.

Start the engine or switch on the motor carefully ac- cording to instructions and with feet well away from the blade.

Do not tilt the lawnmower when starting the engine or switching on the motor, except if the lawnmower has to be tilted for starting. In this case, do not tilt more than absolutely necessary and lift only the part which is away from the operator.

Do not start the engine when standing in front of the discharge chute.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Never pick up or carry lawnmower while the engine is running.

Stop the engine and disconnect the spark plug wire:

-before cleaning blockages or unclogging chute;

-before checking, cleaning or working on the lawn- mower;

-after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawnmower;

-if the lawnmower starts to vibrate abnormally (check immediately).

Stop the engine:

-whenever you leave the lawnmower;

-before refuelling.

Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of mowing.

Go slow when using a trailing seat.

IV. Maintenance and Storage

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

Never store the equipment with petrol in the tank inside a building where fumes may reach an open flame or spark.

Allow the engine to cool before storing in any enclo- sure.

To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or excessive grease.

Check the grass catcher frequently for wear or dete- rioration.

Replace worn or damaged parts for safety.

If the fuel tank has to be drained, this should be done outdoors.

3

Image 3
Contents 55S L Contents Indice III. Operation IV. Maintenance and StorageTraining II. PreparationIV. Wartung und Lagerung SchulungII. Vorbereitung III. BetriebIV. Entretien et Entreposage Précautions d’utilisationII. Préparation III. UtilisationIV. Mantenimiento y Almacenamiento InstrucciónII. Preparación III. OperaciónIV. Onderhoud en Opslag Veilig werken met handbediende grasmaaimachinesII. Voorbereiding III. BedieningIV. Manutenzione e Periodi di Inattivita’ Addestramento All’usoII. Preparazione III. Funzionamento190 Page Griff Install Rear Foot GuardInstallez le protecteur de pieds arrière HandlePour Convertir la Tondeuse Ajuste AdjustmentTo Convert Mower Umrüsten des MäweksRemplissage d’huile AjusteFilling with Oil ÖlaffüllingArranque y Parada Starting and StoppingStart und Stopp Marche et ArrêtFuncionamiento Mise en serviceDrive LaufAplicacion MAX UseGebrauch UtilisationInspeccion MaintenanceWartung EntretienRevisión anual Al terminar la estación Annually After end of seasonJährlich nach Beendigung der Saison Annuellement à fin de la saisonTransporto TransportTransporte Vervoer532 41 90-73 Rev Printed 10.17.08 TH/TH/BY/BY/BY U.S.A

J 55S L specifications

The Husqvarna J 55S L is a versatile and powerful chainsaw designed for both professional and semi-professional users. It stands out in the Husqvarna range with a combination of user-friendly design, cutting-edge technology, and impressive performance, making it an excellent choice for tasks such as tree felling, limbing, and cutting firewood.

One of the key features of the J 55S L is its robust 55cc engine, which delivers a remarkable output, enabling operators to handle a variety of cutting applications with ease. This powerful engine is complemented by Husqvarna's X-Torq technology, which reduces fuel consumption and emissions without sacrificing performance. This environmentally friendly aspect makes the J 55S L not only efficient but also compliant with modern regulatory standards.

The chainsaw is equipped with an efficient cooling system that helps maintain optimal operating temperatures, extending the life of the engine and improving performance during prolonged use. Additionally, the J 55S L features an adjustable oil pump, allowing users to customize the chain lubricating system according to their specific needs. This ensures optimal chain lubrication, thereby enhancing cutting efficiency and prolonging the life of the chain and bar.

User comfort and safety are paramount in the design of the Husqvarna J 55S L. The chainsaw comes with a low-vibration system that significantly reduces vibrations transmitted to the user's hands and arms, minimizing fatigue during extended use. It also features an ergonomic handle design with a soft grip, which further enhances comfort while providing reliable control.

Furthermore, the tool's quick-release air filter facilitates easy maintenance, ensuring that users can keep the chainsaw in peak operating condition without excessive downtime. The chainsaw is also designed with an easy-to-access chain tensioning system, allowing for quick adjustments on the go.

In summary, the Husqvarna J 55S L combines powerful performance, innovative technologies, and user-centric design to create a chainsaw that meets the demands of both professional and casual users. Its balance of power, efficiency, and comfort ensures that it can handle a wide range of cutting tasks effectively, making it a solid investment for anyone in need of a reliable chainsaw. With its proven durability and advanced features, the J 55S L is a standout choice in the competitive chainsaw market.