Husqvarna YTH2648 TF owner manual To Stop Mower Blades, Reverse Operation System ROS See Fig

Page 11

OPERATION

TO STOP MOWER BLADES

•Disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield

(S) in place (See Fig. 10).

S

Fig. 10

REVERSE OPERATION SYSTEM (ROS) (See Fig. 11)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

 

02828

ROS "ON"

ENGINE "ON" POSITION

POSITION

(NORMAL OPERATING)

Fig. 11

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

•Depress brake pedal all the way down.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before and while backing.

•Slowly depress reverse drive pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowlydepressappropriatedrivepedaltoslowestsetting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 3 and 12)

When pushing or towing your tractor, be sure to disengage transmissionbyplacingfreewheelcontrolinfreewheeling po- sition.Freewheelcontrolislocatedatthereardrawbaroftractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TRANSMISSION ENGAGED

TRANSMISSION DISENGAGED

Fig. 12

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents YTH2648 TF II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Toremovetractorfromcarton AssemblyTools Required for Assembly Unassembled PartsCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Dphg E CJK Know Your TractorStopping See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged To SET Parking Brake See FigTo USE Cruise Control J See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Move Forward and Backward See FigTo Operate on Hills Using the Reverse Operation SystemTo Stop Mower Blades Reverse Operation System ROS See FigADD Gasoline Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelAutomatic Transmission Warm UP Mowing TipsPurge Transmission Schedule MaintenanceMaintenance General RecommendationsBlade Removal See Fig BatteryTractor Blade CareEngine Deck Washout Port See Fig CleaningIN-LINE Fuel Filter See Fig O P Service and AdjustmentsTo Install Mower See Fig To Remove Mower See FigSecure with small washer and small retainer spring as shown To Level Mower To Check Brake To Replace Mower Blade Drive BeltTo Remove Wheel for Repairs See Fig Belt InstallationTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBERTo Remove CABLES, Reverse Order To Start Engine with a Weak Battery see FIGReplacing Battery See Fig Transmission Engine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine continues KEY Part NO. no Description DecalsWheels and Tires SCH12 SchematicTractor Model NO. YTH2648 TF 96041022500, Product no 41 KEY Part Description ElectricalChassis Tractor Model NO. YTH2648 TF 96041022500, Product no 41 284 DriveTransaxle, Tufftorq K46BT Engine Engine Power Rating Information Steering Assembly 532 42 Seat Seat AssemblyMower Deck Tractor Model NO. YTH2648 TF 96041022500, Product no 41     Mower LiftWhill Only Ride UP and do Hillss Not Acro Axms Reeg DE51 Ggus12.16.10 AP

YTH2648 TF specifications

The Husqvarna YTH2648 TF is a standout riding lawn mower designed for homeowners seeking efficiency, comfort, and longevity in their lawn care endeavors. With a powerful yet reliable engine, advanced features, and user-friendly design, this mower is ideal for tackling medium to large areas with ease.

One of the most notable features of the YTH2648 TF is its robust 24 HP Briggs & Stratton engine. This engine provides ample power to navigate tough terrains and thick grasses, ensuring efficient cutting performance. The mower's hydrostatic transmission delivers seamless speed adjustments without the need for clutching or shifting, allowing operators to maintain momentum and focus on the task at hand.

The cutting deck of the YTH2648 TF measures 48 inches in width, making it suitable for covering expansive areas quickly. It features a reinforced steel construction that enhances durability and extends the lifespan of the mower, even under rigorous use. The mower’s cutting height can be easily adjusted with a lever, offering six different settings from 1.5 to 4 inches, ensuring precise control over grass length.

Comfort is a key consideration in the design of the YTH2648 TF. It comes equipped with an ergonomic seat that provides support during longer mowing sessions, paired with a soft-grip steering wheel that enhances control. The mower's compact design allows for easy maneuverability around obstacles, such as trees and flower beds, while its tight turning radius ensures that no corners are left uncut.

The Husqvarna YTH2648 TF also features innovative technologies such as the Air Induction mowing technology. This system enhances airflow within the deck, resulting in a cleaner and more consistent cut. Additionally, the mower supports a variety of accessories, like mulching kits and baggers, allowing homeowners to customize their lawn care approach to suit their unique needs.

For added convenience, the YTH2648 TF incorporates easy-to-reach controls and an intuitive dashboard that provides information on fuel levels and speed. A durable front bumper offers protection against accidental impacts, contributing to the mower's overall resilience.

Overall, the Husqvarna YTH2648 TF stands out as a reliable riding mower that combines power, precision, and comfort, making it an excellent choice for homeowners looking to achieve a well-maintained, beautiful lawn with ease.
Top Page Image Contents