Husqvarna YTH2454T Reverse Operation System ROS, To Operate on Hills, To Transport See Figs

Page 14

OPERATION

S

FIG. 20

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

•Depress brake pedal all the way down.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before and while backing.

•Slowly depress reverse drive pedal to start move- ment.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowly depress appropriate drive pedal to slowest set- ting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 13 and 21)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

Transmission Engaged

Transmission Disengaged

FIG. 21

SERVICE REMINDER/HOUR METER

Service reminder shows the total number of hours the engine has run and flashes to indicate that the engine or mower needs servicing. When service is required, the service reminder will flash for two hours. To service engine and mower, see the Maintenance section of this manual.

NOTE: Service reminder runs when the ignition key is in any position but "STOP". For accurate reading, be sure key remains in the "STOP" position when engine is not running.

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents YTH2454T General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Mower Mower Front WheelTo Remove Tractor from Carton AssemblyTools Required for Assembly Unpack CartonInstall Mower and Drive Belt First Install ANTI-SWAY BAR S7/16 Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor StoppingSystem Characteristics To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To USE Cruise Control -J See FigReverse Operation System ROS Service REMINDER/HOUR MeterUsing the Reverse Operation System To Operate on HillsADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips Before Each USE MaintenanceLubrication Chart Brake Operation BatteryTractor TiresEngine Muffler CleaningEngine OIL Filter Spark PlugsTractor See Fig Service and AdjustmentsTo Install Mower To Remove MowerTurn nut right Turn nut left To raise mower To Replace Motion Drive Belt To Replace Mower Blade Drive BeltTo Check Brake To Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Attach Jumper CablesTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor Model NO. YTH2454T 96043002203, Product no 43Electrical KEY Part NO. NO.DESCRIPTION Chassis KEY Part Description Drive KEY Part NO. NO.DESCRIPTION Steering Assembly Spark Arrester KIT EngineSeat Assembly Decals Wheels and TiresMower Deck KEY Part NO. NO.DESCRIPTION Mower Lift Suggested Guide for Sighting Slopes for Safe Operation Warranty Statement

YTH2454T specifications

The Husqvarna YTH2454T is an exceptional riding lawn mower designed to provide both efficient performance and comfort for homeowners with larger lawns. With a powerful engine and a range of innovative features, this machine stands out as a reliable option for residential lawn care.

At the heart of the YTH2454T is a robust 24 horsepower Briggs & Stratton V-Twin engine. This reliable power source ensures smooth operation and ample power for tackling any mowing task. The engine's design allows for increased durability and reduced vibration, making mowing a more enjoyable experience. The hydrostatic transmission provides effortless speed control, allowing the operator to maintain a consistent pace while moving forward or in reverse, without the need for shifting gears.

One of the standout characteristics of the YTH2454T is its 54-inch cutting deck, which enables the mower to cover large areas efficiently. The deck is designed with a stamped, reinforced steel construction, providing durability and longevity. The cutting height can be easily adjusted from 1.5 to 4 inches to suit different grass types and conditions, ensuring a clean and precise cut every time.

Husqvarna has incorporated innovative technologies to enhance the user experience. The air induction mowing technology improves grass lift and guarantees an even cut, while the deck wash port allows for easy cleaning of the mower deck after use. The ergonomic steering wheel and comfortable seat reduce operator fatigue, even during extended mowing sessions.

Additionally, the YTH2454T features an integrated mulching capability, enabling the mower to finely chop grass clippings and return them to the lawn, enriching the soil and promoting healthy growth. The easy-access controls make it user-friendly, ensuring that both novice and experienced users can operate it with ease.

With a tight turning radius of 16 inches, the Husqvarna YTH2454T excels in maneuverability, allowing it to navigate around landscaping, trees, and flower beds with minimal effort. This combination of power, comfort, and advanced features makes the YTH2454T a top choice for homeowners looking for a reliable and efficient riding mower. Whether maintaining a sprawling lawn or tackling rough terrain, the Husqvarna YTH2454T proves to be an excellent investment for achieving a beautifully manicured yard.
Top Page Image Contents